7th May 10.37j Build 19: >zip update: Wunderground Almanac working again after they made changes. Now uses the RSS feed...much better (and other countries work now too) (you will need to reset the station remembered (state and station), in a new updated version of WD. Also latest update working good now with the WH1081 in direct mode
6th May 10.37j Build 18: Dang!. Now fixes the daily date stamped av/ext graph upload.
4th May 10.37j Build 16: Sorry, introduced a problem with the daily date stamped graphs with the av/ext routine in build 15 for the current month used. You will now need build 16. Sorry for the inconvenience
3rd May 10.37j Build 15: Recommended upgrade to fix end of month reports and missing last day in previous reports in the av/ext reports
3rd May 10.37j Build 14: Fixes the missing date stamped graph file at the end of the of the month, and some other (should be good now) end of month date formating issues
2nd May 10.37j Build 13:Should be better for when the Vortex anenometer used in regard to checking maximum speeds
a couple of end of month bugs fixed (still a couple more to be fixed).Should be better for the wmr200 history data ...increased the missed data length threshold check
2nd May 10.37j Build 12 full install update: Added direct support for the Watson WH1081 station (no need to run easyweather software)
27th April 10.37j Build 12: Fixes to use solar in a jar with a wmr100/200/Irox station instead of estimated solar from UV. Fixes month title on av/ext web page. Should be all good for that now.Fixes soil temperature showing up wrongly
25th April 10.37j Build 11 : Fixes the day on the date stamped web graph for the av/ext daily update. Fixes the manualy added files to the auto databackup .zip no being remebered (included in the full install). Also the dew point all time records are now correctly added to the clientrawextra.txt file
24th April 10.37j Build 10 update: New wdwebcamcapture.exe version: updated component, should fix some things.Gill windsonic windspeed spikes should be fixed.Added rain for the last week to the weekly email report. Rain days under view, rain chart, now uses the rain days threshold (set under setup, advanced/misc), that the detailed rain chart uses. Made a change that should help let the Davis IP data logger still update to the davis web site (if set to release every minute set)
22nd April 10.37j Build 10: Added new seconds time tag. Fixed that if after going to the weatherbug setup, then you can not go to the Awekas setup unless you restart WD. Fix for meteohub missed data not finishing.
18th April 10.37j Build 09: Fixes metehub data extraction problem
17th April 10.37j Build 08: Checks added for Gill windsonic windspeed. Improvements for the wmr200 history data. now year and month to date all time records are checked when converting logfile to data file
16th April 10.37j Build 07: Full install update: Now supports the Weather Hawk data logger
14th April 10.37j Build 07:Fix for WMR200 average windspeed, and added in battery status too (new wmr100.exe in the full install). History data working faster again
12th April 10.37j Build 06: Added support for WeatherBug Backyard Weather Real time data (full install version )
10th April 10.37j Build 05:(.zip) Fixes the WMR200 history extraction skipped data problem. Web av/ext rewrite of the code looking good now.
7th April 10.37j Build 03: The new av/ext web rewrite should be good now.
4th April 10.37j Build 01: Some fixes for the rewrite of the daily av/ext routine
3rd Aoril 10.37j Build 00: A re write of the code for the daily averages/extremes for the web page. Fixes end of months bugs and other associated bugs. Also you can now add in daily weather conditions from past days (via input daily weather).
2nd April 10.37i Build 20: Fixes a bug some people had with the previous months logfile getting deleted on the month roll over (it can bre created via action, convert WD logfiles to data files (then tick convert data file to logfile and choose that months data file and click on convert)
1st April 10.37i build 19: Added ability to set the image/file size of the animatedwebcam.gif Note that was an april fools joke in the program on start up before noon, 1st April, in the .zip update
30th March 10.37i Build 18: Supports Meteobub via HTTP now. Some other minor fixes.Added new snow days tag
22nd March 10.37i Build 16: Some minor fixes and improvements as per the WD forum. Fixes 10 minute average windspeed option for CWOP data.
13th March 10.37i Build 15 update: Fixed the skipped data problem with the wmr200 history extraction at start up
12th March 10.37i build 15: Added ability to change the output frequency of the MP3 voice file , to the weather voice setup. Added a fudge solar % offset for between certain times of the day (for shadow effects), to the max solar for lat/long setup. New Ftpupd.exe version, to fix the .swf file uploads
11th March 10.37i Build 14 : Improvement for the WMR200 history data. Fix for the wmr100 extra sensors for when then the wmr100 program restarts.
Humidity offset/slope offset should now work for the Ultimeter in complete record mode.
9th March 10.37i Build 13 .zip update: Update for the next release of WDL. Also some additions for wedaal.txt
5th March 10.37i Build 13 .zip update: Improved the av/ext web page recreate function...now rain for month and year and each day totals up correctly for each day. Also fixed some other problems with wrong days data being used.
4th March 10.37i Build 11 .zip update: Should fix the leap year Feb av/ext reports missing day 29. Fixes the missing day 29 for the solar data for Leap year Feb for when viewing the av/ext data and recreating the av/ext web page for February.
3rd March 10.37i Build 11 Update: Improvement for the last 7 day data for WDL
27th Feb 10.37i Build 11 update: Tidied up the lightning count screen. Weather answer phone system improved.
22nd Feb 10.37i build 10 update: Improvements for the new speech setup. CWOP data send only occurs at the minute that is the last number in the CWOP number (as per the CWOP guidlines)
21st Feb 10.37i Build 10, fixes noaa report max gust speed. Fixes "cloudy with clear p" problem
20th Feb 10.37i build 9 .zip update: Added daily rain for each day to the av/ext .html, and the month rain total now adds up when recreating that. Some improvements to the THSW .Irox rain amounts match OK now (with updated iroxdata.exe program)
19th Feb 10.37i Build 08 .zip update: Added hi/lo numbers for temperature to the noaa 5 day forecast. Updated weather voice driver, now has SAPI5 suport (you will need to reselect the speech driver) and updated weather answer phone (full install needed)
18th Feb 10.37i Build 07 .zip: Improvement for wmr200 history. Fixed reset of max gust via action, reset selected all time records, for km/h, showing the windrun data instead.Added support for Meteohub , TCP/IP(wmr968)
14th Feb 10.37i Build 06: Has the night time weather conditions/description/metar description working correct again.
13th Feb 10.37i Build 05: Fixes current/vs average graph under view, av/ext, where the average line was 1 day out.Update: added separate rain threshold for year to data for detailed climate report conditions. New .zip updated: Added Thunder (via strikes counts for each day against threshold in the detailed climate report) and totals days of thunder, to the detailed climate report (for stations with a lightning detector (1 wire or Nexstorm /Lightning 2000)
9th Feb 10.37i Build 02:Fixes extra hum 2 for plotting being 0 (if extra hum 3 is 0). More improvements/fixes for wmr200 history data (especialy for if extra temp/hum sensors). New Ftpupd.exe version with full install fixes the remote direcory setting for wxlocal5 and above in the customise internet and file creation setup not being used.
8th Feb 10.37i Build 01: Fixes UV data not being sent to WU
7th Feb 10.37i Build 00 Default CWOP server to use changed to cwop.aprs.net . Some more BFT tags added.
4th Feb 10.37h Build 26 .zip udate: Added hail (intensity/duration/amount/peak) info as custom tags for the Vaisala WXT510 Ultrasonic.
3rd Feb 10.37h Build 26 .zip update: Another fix for wmr200 history. Fix for detailed climate data for year data for diff from average for the whole chosen year for temperature and windspeed.Fix for Ultimeter stations for wind direction , when using complete record mode
2nd Feb 10.37h Build 25 More fixes for the wmr200 history extraction. New .zip update: Fixes date and time of last rain being reset at start up
28th Jan 10.37h Build 22 Update: Fix for wmr200 history data for when extra temp/hum senors in use. Some language fixes/additions.
26th Jan 10.37h Build 20 update: Fixes a bug with the wmr200 station where the separate data gathering program was not starting
25th Jan 10.37h Build 20 Fixes rain bug with the Irox station at start up.
25th Jan 10.37h Build 19 .zip update: Fixes a bug with temperature from a Metar. Fixes a problem with the dailylogfile.txt getting corrupted when recreating the av/ext.
22nd Jan 10.37h Build 19: Added suppor for the new Davis VP IP data logger (live data). Fixed bug with wmr200 forcast icon use.
20th Jan 10.37h Build 18: wmrbatterystatus.gif now works with the WMR10/WMR200.Fixes an exit error.
18th Jan 10.37h Build 17: Fix for missed rain from Davis VP download (especialy if 10 minute logging inteval in use). Fixes the /Dusk/Dry/Dry/ bug too
17th Jan 10.37h Build 15 update: Fixes detailed rain chart day 31 not showing for midnight reset use.
Build 16 .zip update: Missed data catch up from the WH1080PC via the easyweather data file working now.
16th Jan 10.37h Build 15: Fixes rain with the irox (rain spike occuring just at the end of the history data extraction at start up).
13th January 10.37h Build 13 .zip update: Fixes the duplicate day in the av/ext report recreate
7th January 2008 .zip update: Fixes the detailed rain chart being 1 day out. Build 11 .zip update:
Max/min from WXSIM in the 5 day forecast for a night time forecast works now.
5th January 10.37h Build 10 update: Adds leading zeros to the date stamped dailywebcam.gif file (for months or days less than 10), to avoid duplication/overwritting of that file
3rd January 2008, 10.37h Build 10: More fixes for WMR200 data history catch up (for barometer and rain). Also WMR200 forecast icon functionality added.
31st December 10.37h Build 08: Fixes a bug with %bftspeedtext10%. Also fixes the links for Wedaal
26th December 10.37h Build 07: Fix for the graphs for each day for the recreate the av/ext. Fecix for the WMR200 for history data at start up when more than 1 extra temp/hum sensor. Fixes m/s units for the new windrose.Fixes the missing FWI pointers
26th December 10.37h Build 06: Fixes the missing > in the new FONT COLOR html code for the max/min temperature and daily text in the av/ext page (December2007.htm) (you will need to edit that back in again). New wmr100/200.exe version for the OS WMR200 which will reset the USB port when no data arrives from the WMR200
19th December 10.37h Build 05: Fixes bug for rain for each day for the new detailed rain chart where the rain fell in the last hour of the day
19th December 10.37h Build 04 update: Added support for the WH1080PC station via the easy weather data file
16th December 10.37h Build 04: Change in the barometer checking for Ultimeter stations (for quality checking). Red/blue colour for the max/min temp in the daily report now. Should fix the dirplot2.gif not being 24 hour. Low windspeed plot should be better now for stations that calculated their own windspeed. Added leading zero for date stamped daily all day video file now
13th December 10.37h Build 03 update: New WMR100/200 version, fixes the slow update rate for the outdoor temp/hum sensor for the WMR200 station (set the outdoor temp/hum sensor to use to 0 (default) (make sure to exit the running wmr100/200.exe program first to get it updated with the new version in the full install download)
11th Dec 10.37h Build 03 update: Added ability to show/hide objects on the weather dials screen (right mouse click to do that)
9th December 10.37h Build 03: Fixes 2x rain amount for the irox/nexus/honeywell station
6th December 10.37h Build 02: More end of month fixes for reports and uploads(and for the new year too).
3rd December 10.37h Build 00: Fixes the date stamped grpah file link and creates each day date stamped graph file when doing the recreate av/ext file and also the last day is found OK now too (uses the logfile to do this). Also fixes a bug with 9am reset where the logfile was deleted at midnight.
30th November 10.37g Build 19: Fixes last year data not showing in the temp/wind/rain trend for the last day.More French language added.
28th November 10.37g build 18: Fixes year rain total in the new detailed rain chart. Also fixes the switch in the customise internet and file creation setup for wxlocal.html 5 and above not being set on or off in the settings save
26th November 10.37g Build 16: Added ability to create/upload the new detailed rain chart to the customise internet and file creation setup (as raindetail2.gif)
25th November 10.37g Build 15: Added year to date and average year to date rain to the new rain screen
23rd Nov 10.37g Build 14 update: New wr100/200.exe version, shows needed info for the wmr200 staton to find which sensor number is your outdoor temp/hum sensor. Some other minor fixes and improvements .Fixes bug with HTTP download #3 using #2 times.More info added to new rain chart.
14th Nov 10.37g Build 13: You can now set the scales on the temp/wind/rain trend chart. Also for year to date , the rain for the current month should now be correct there
13th Nov 10.37g Build 12: Day 31 now works with the new rain chart, and also the number of rain days now works correctly with the rain day threshold under the advanced/misc setup
10th Nov 10.37g Build 11: Fixes and improvements for the new rain chart.New wdmysql version with the full install fixes a bug for the date at midnight
5th Nov 10.37g Build 10: Fixes a bug with 9am reset time and end of month change. Also fixes bug with WMr200 station for sensor number to use causing error with integer at start up. New feature added: new rain chart, see under view, rain data
29 Oct 10.37g Build 08 New additions to the detailed climate data reports (you will need to use the new templatest in your web files folder), difference from average for windspeed and rainfall. Fixed logfile not starting new on first day of the month for midnight reset time.
21 Oct 10.37g Build 07 Fixes stopping of data problem introduced with the 2310 type stations
15th Oct 10.37g Build 06 .zip update: Fixes viewing of a different month for the graphing under view, sunshinehours/evapotranspiration. Also fixes wetbulb plot for auto scale graphs all the time option. Fixes dew point plot error on the real time graph after restarting WD. Added webcam image time stamped file override (so no animatedwebcam.gif needed)
8th Oct 10.37g Build 05: Fix for tempwindrain trend for when only 30 days last month. Full install update includes new wdwebcamcapture.exe program (fixes the overlay problems and also its now not compressed (the .exe) which fixes the instability some people had
3rd Oct 10.37g Build 04: End of month problems now fixed.Added new data file so lightning counts for each day can be stored
2nd October 10.37g Build 03: Fixed the %nowrainjun% type custom tags. Fixes missed rain during heavy rain with a Lacrosse 2300/2310 type station
30th September 10.37g Build 00: Fixed more end of month problems.
29th September 10.37f Build 18: Positions of max/min on the 5 day forecast for wxsim remembered when customising.Fix for days along bottom of 3D temp/wind/rain chart. Full install has new clientrawrealtimeftp.exe, which fixes the clientrawdaily.txt not uploading. Fixes bug with rain from a Davis VP during data extraction at start up.Fix for the rainnow tags (for this months rain total (it was instead using the today rain and not month rain total)
21st September 10.37f Build 17 .zip update: Added Chandler Burning index to FWI screen and as custom tag. THSW now calculated below 17oC
15th September 10.37f Build 17: Fixes bug in the temp/wind/rain trend (should be all good now!) (also in the last31daysdata.txt)
9th September 10.37f Build 15 .zip update: fixes the heat index not working for metric (bug introduced when I improved the THSW calculation)
6th September 10.37f build 15>: update: improved the handling of UV and solar for the WMR100 and Irox stations
3rd September 10.37f Build 15: fixes the recreate last 31 days data file. Also fixes a introduced bug with the VP data extraction
27th August 10.37f Build 14: Weather Link .wlk file import much improved (faster and the rain totals update correct now)
27th August 10.37f Build 13: Full install update: New wdewebcamcapture.exe, 7.1, seems to start up better for people who had problems with the upgraded component. Added Freewx logfile import
26th August 10.37f Build 13: Update: a couple of fixes for Metars. Fix for original WMR918 station after change I made in the code (combining of the code)
23rd August 10.37f Build 13: Update: Fixes Spanish and French language in the FTP/internet setup
20th August 10.37f Build 13: Update: Improved (faster and fixes rain bug) history data extraction when using heavy weather history.dat file with a 3600 station
18th August 10.37f Build 13: Fixes incorrect monthly rain total in the averages/extreme web report for when inches of rain used. Also fixes the vpforecast being stuck (i left some debug code in). Added year data to the wind temp rain trend
15th August 10.37f Build 11 update: Added support for Lightning2000 (via the nowcast.txt file)
14th August 10.37f Build 11: Fixes the customcleintraw.txt file not updating in build 10
13th August 10.37f Build 10:Added ability to be able to set the sig weather conditions threshold for the detailed climate reports. Update: fixed the rain with the VP .wlk import
10th August 10.37f Build 10: Added significant weather conditions and Fog and Gale days to the detailed climate report (copy the new climatedata.html and climatedatayear.html files to your web files folder. New client viewer with custom tags on a new custom screen.
7th August 10.37f Build 08 : Fixed the humidity plot for a day selected under view, graph history. Update: Fixed sunsine hour for months from years prioe to the current year under view, sunshine hours.
6th August 10.37f Build 07 .zip update: Found I was not setting the Baud rate on the Irox Pro for the data extraction at start up, so would cause sometimes to not work if the weather station had been reset and then PC rebooted.
5th August 10.37f Build 06 .zip upate: Fixed the davis VP .wlk data file import! (does not miss data anymore) :). Also full install now has the latest wdwebcamcapture.exe program (that has IP camera support). Also fix for wdmysql data import where there month only has 30 days
3rd August 10.37f build 05: Done more work on the end of the month bugs (for the uploading of the time stamped noaareport and climatedata files)
3rd August 10.37f Build 04 update: Fixes a bug in the view, averages/extremes for when selecting a day to view,it was loading up the months before data for wind direction
31t July 10.37f Build 04: Improved the web page search, handles NOAA web page OK now.Added option to shift the wind direction on the real time graph 180o
26th July 10.37f Build 03: Added much more Italian translation (basicly complete now). Fixes spike in lightning counts from nexstorm to WDL.Added VP storm rain tags
23rd July 10.37f Build 01: Fix for the wind direction plot under view, averages/extremes. Possible fix for the high nexstorm hour 11 count for WDL
20th July 10.37f Build 00: Fixed the selecting different months etc under view, averages/extremes (happened after adding the new wind rose). Fixed some more end of month bugs (like day 31 missing etc) ...should be good now hopefully. Missing minutes of sunshine due to the seting of the VP time at 6:06 am fixed.
18th July 10.36e Build 19: New auto scale option for all graphs (see in graph setup, scale setup) (not web graphs at this stage). Fixed the move left button on the main screen graph. Fixed first lightning warning email for 1 wire lightning
16th July 10.36e Build 16: New wind direction Rose under view,averages/extreme,speed/vs direction.
10th July 10.37e Build 15: Fixes the time from graph cursor/web image at cursor problems introduced when the time from cursor is now in the format you have set in WD for time format
8th July 10.37e Build 13 update: Indoor log is now converted to .inf data file, so now indoor tem/hum is available in the graph history. New month/year stamped time file too created.
5th july 10.37e Build 13: Fixes days along the bottom of the sunshine hours graph and wind/rain/temp trend graph
5th july 10.37e Build 12 update: Fixes bug with the honeywell/irox station where WD would sometimes record rain but not othertimes
3rd July 10.37e Build 12: Fixes the time format introduced problem in the clientrawextra.txt file. Fixes the create av/extremes that was broken (after a change in a graph routine when fixing an end of month issue).Fixes extra humidity values with the WS2500 station
1st July 10.37e Build 11: Fixes a few end of month bugs. Time format from mouse graph position now what you have set the time format to be. Windspeed and baro data now updates along the time of the windspeed
graph from the temp/hum graph mouse position.
30th June 10.37e Build 10: Update: Fixes data stopping with the WXT-510 station
29th June 10.37e Build 09 update: Fixed the SMS email to this list in the email warning not working for authentic email username only (new ftpupd.exe version). Added test button for email warning to the noaa xmlwarning program (and the noaa xml warning time to send again is now in minutes)
28th JUne 10.37e Build 09: Noaa xml program: now honours the time between can send again but added option to send always. More Spanish translation added. Fix for VP forecast icon for rain.Fix for exit password and the X still closing WD
26th June 10.37e Build 08: Updated more German translation. Irox history extraction working great now
23rd June 10.37e Build 07: Changed it so that the ° is only used for web pages to show the degree symbol.Irox history extraction should work better for data wrap around for stations with only 8k memory
Custom mysql working ok now.
Update to .zip version: added option to not ftp to default server if ftping to other ftp servers in the advanced internet setup
22nd June 10.37e Build 06: Converted the remaing custom tags still ising the degree symbol over to using ° to fix ? showing on the web page.
20th June 10.37e Build 05 .zip update: Added ability to set the hour for the end of the day all day video updates (instead of fixed at 22 hour (10pm)). customclientraw.txt now copied to 2nd
location if that is setup for the clientraw files.
18th June 10.37e Build 04 .zip update: Fixes forecasticonword tag and icon at night for forecast from station fro VP. Fixes new mainlycloudy icon around the edge of the image problem
17th June 10.37e Build 03 .zip update: Added ability to receive via TCP over an internet connection data from a IRDAM station
16th June 10.37e Build 03 .zip update: Added a mainly cloudy icon (icon number 19) for use from the solar to set icons option.
14th June 10.37e Build 03: Fixes the daily date stamped graph file (problem introduced after fixing the end of the month issue)
13th June 10.37e Build 02: Fixes FTP bug with a browser window opening, which occured with the latest build
12th June 10.37e Build 01: Update: Fixes heat index plotting incorrectly when over 100oF and fixed weather talk being played instead of writing to the file (problem introduced with latest version
(problem happened I had to reinstall windows)
11th June 10.37e Build 00: Fixes the end of the month report problems (and print/email report (at 14 minutes past the hour) now works again too :)
10th June 10.37d Build 24: Full install update:New Ftpupd.exe version, fixes change directory back after every file even if not set to in the advanced internet setup. New
wdwebcamcapture program, updated component, should vista issue.
9th June 10.37d Build 24: Added custom mysql setup to a new wdmysql.exe program.
6th June 10.37d Build 23 : Fixes a few bugs with the wind/temp/rain trend
5th June 10.37d Build 22 .zip: Fixes crash with the Davis .wlk data file import. Fixes the sunshine hours reported under view, solar detail, graph
4th June 10.37d Build 21 full install: Added ability to have a custom clientraw file created and uploaded with the clientraw real time ftp
1st June 10.37d Build 20 full install: Added wunderground web cam upload setup to the wunderground setup
1st June 10.37d Build 19 .zip update: Added toggle under input daily weather, for to show in next WDL version, the davis forecast text/warning text
30th May 10.37d Build 18 .zip update: Fixes max daily rain day for the noaa report
28th May 10.37d Build 18 : Fixes All time days with rain, being added to the recordssetlog.txt file all the time
10th May 10.37d Build 17 update: Added new data (sunshine hours/soil temperature, etc) to the Awekas direct upload.Added option to have lighteninggraph.gif just the graph only
8th May 10.37d build 17: Yesterday video should now be able to be set to be created and uploaded if nothing else set. Some bugs fixed with the new davis soil temp 2,3 and 4 all time records
7th May 10.37d build 16: added all time record for davis VP soil temperature 2, 3 and 4.Update: added SFTP option for clientrawrealtime ftp uploads (faster)
7th May 10.37d build 15 update: Fixes dew change last hour custom tag (problem when using USA units)
3rd May 10.37d build 15 update: Fixes, this time, the double dry, at dawn/dusk, for %currentsolardescriptoin% custom tag. Added all time record for extra temp 5. Added weather warning email for extra temp 5
30th April 10.37d build 15: Added all time records for days with rain (custom tags and ability to reset/set values). Update, .zip: added some more custom tags (min windchill/max heat index year ago)
29th April 10.37d build 14: Small change/fix to the clientrawextra file for the next version of WDL
28th April 10.37d build 13: A couple of solar bug fixes. Update: added hi/lo temperature to 5 day forecast from wxsim
26th April 10.37d build 11: Fixes icon from solar for the Honeywell/Irox station. Also a fix for solar %.Update: New wdwebcamcapture version: stretch fro video size works now (next time restart) and added prefered video size for #2 webcam.Also new clientrawrealtimeftp.exe version, to upload the new detailed clientrawhour.txt file for WDL
24th April 10.37d build 09: Fixes sunshine hours not being calculated for the WMR100 and Irox stations
build 10: fixes introduced problem of not completing the exiting of the program
23rd April 10.37d build 07: Fixes average windspeed for the Capricorn 2000
Build 08: Should fix the Dry being reported 2x during dawn and dusk for the solar description
22nd April 10.37d build 06: .zip update: Fixed problems with dallas 1 wire extra temp 4 and above,and also the extra temperature offsets.More french translation completed.
20th April 10.37d build 04:Added new data needed for the next update of WDL (still to get added to the realtimeftp still)
11th April 10.37d build 02: update to fix the wrong version uploaded (which resulted in a basic WMR100 version)
11th April 10.37d build 01: Added last 7 day graph data for the next version of WDL to the clientrawdaily.txt file
10th April 10.37d build 00: added colour to the wind direction plot for windspeed strength. A couple of 1 wire custom tag fixes (time from humidity low)
9th April: 10.37d build 00 .zip update: All day video creation now set at 23 minutes past the hour instead of 13 minutes past the hour, to avoid conflict with the hour creation. More French translation done.
4th April 10.37d Build 00: Fixes the wind direction plot (after I made the graphic in the center a better size). Fixes start up error introduced if German languge selected.A few more improvements/fixes for the Irox data extraction at start up
4th April 10.37c Build 28, .zip: Irox data extraction working great now!. Wind direction plot graphic improved.
3rd April 10.37c build 26 update: Irox/Honeywell data history extraction now works correctly :)
2nd April 10.37c build 25: Now Dewpoint and windchill update straight away instead after only the first 2 minutes have passed (happened if no datalogger). Fixes sunsine hours and solar /uv real time data no being updated from history data extraction at start up (e.g Davis VP)
31st March 10.37c build 23: Solar % and then then sunshine hours fixed for the Irox/honeywell station.
29th March 10.37c Build 22: More french translation. UV for WMR100/Irox now shows up in daiy hi/low and sunshine hours screen and max/min UV on bar on main screen should be fixed. Nexstorm integration stoping updating error should be fixed.
25th March 10.37c Build 21: Fixes solar wm/2 plot not working on the solar real time graph for the texas instruments station.New moviemaker.exe version fixes crashes that occured between midnight and 2am (the all day video files are not know created between those times). Fixes a bug with the 1 wire station temperature not updating
23rd March 10.37c build 19: Fixes the thumbnail creations (and also now works for the forecasticon.gif). Improved French translation of what has been done so far (sentence length etc). Also fixes bug with if jpeg files selected, foreacasticon.jpg was trying to be uploaded instead of forecasticon.gif
22nd March 10.37c build 17: Fixes 1 wire solar % solar
20th March 10.37c build 16: new clientrawrealtimeftp program now correctly uploads webcam image if selected to do that. Alldaymovie.swf is now uploaded fully with the new ftpupd.exe version (i now use the SFTP to do that).
19th March 10.37c build 14 More French translation added. Some fixes for the Ultimeter station (problem happened after a incoming data re-organisation).Now works with all 9 extra temp/hum sensors from a WMR100
16th March 10.37c build 13 full install update:New moviemaker.exe version, now, for every 10 minute video, should stop the probem of if an error then the files were not being deleted (as now the files from midnight to 1 hour ago are deleted before the movie is created).
16th March 10.37c build 13 : Fixes windrun not showing (introduced bug), if selected. Added ability to set the minimum count for lightning counts to plot on the lightning count line on the graphs (good to not show background noise)
15th March 10.37c build 12 update: #2 setup for weather report emails custom report settings now independent more. Note, use 2customsubject.txt (and 2customsubject1.txt, etc)
13th March 10.37c build 12: Improved the layout of the custom screen right mouse click menu options
12th March 10.37c build 11: Added ability to draw temporary grid lines on the main screen and custom screens (good for aligning things)
12th March 10.37c build 10 update: Fixes Irox data extraction not working past memory location 1715
10th March 10.37c build 10 update:Fixes wind direction and humidity data in the clientrawdaily.txt file.Improvement for the 3rd party web cam setup time stamped file creation timing.
8th March 10.37c build 10. Fixes the daily webcam update/upload ,tide update/upload and others under file #34 in the customise internet and file creation setup. Fixes the wdmysql on the hour time problem (new full install with new wdmysql.exe version). Fixes introduced bug with the max solar for time of day (when I made it where you can plot the max solar on the graph, I introduced a bug, but OK now). German language completed.
7th March 10.37c build 07 update: Fixes on the hour wrong hour being sent to the wdmysql update (new WeatherD.exe via updated .zip file)
7th March 10.37c build 07 Fixes/improves the file create time when using the 3rd party web cam setup
5th March 10.37c build 06 Added PNG support (custom screen, main screen, weather dials, large display) (more colours than .gif but slightly smaller file size). Also easier now to add custom tags to the custom screen-> you can type in the tag to use if you know it already instead of looking it up in a list.
3rd March 10.37c build 05 Added option to plot max solar for time of day instead of indoor temperature to the solar setup
3rd March 10.37c build 04 Thumbnail creation now working good, via the customise internet and file creation setup
2nd March 10.37c build 03 .zip update: Italian VP text forecast option added.
1st March 10.37c build 03 .zip: Fixes an old bug where the 2310 station type data extraction does not work for when the data extraction occurs during a month change over period
1st March 10.37c build 02 update: new ftp version fixes double up of uploaded files from a HTTP download
1st March 10.37c build 02: MOre German language added. New wdwebcamcapture version:if no gif file name set, then no gif file name produced. Also, if animated web cam no set on in WD in the webcam setup, then no time stamped gif file production, now.
28th Feb 10.37c build 01: Dannish language completed :) Another fix for the data for last year on the temp/wind/rain trend graph. Noaadailyreport.htm drop down for the date stamped files added to the averages/extreme page now. Also added option to use max+min/2 for the average temperature in the noaa report.
27th Feb 10.37c update: Fix for last year data in the temp/wind/rain trend for when you select other months/years there. More Dannish language added.
25th Feb 10.37c Full install update: With a new ftpupd.exe version, and a new option added, the HTTP download can now handle URL that does not contain a file name (i.e the image to download is called via the URL). This is good news for say rain radar downloads or for IP cam image downloads where the actual image file name is not in the URL but is done on the fly by the web server
24th Feb 10.37c end of month reports (climate data and noaa reports) working much better now (I have done lots of testing). More language translations completed (thanks to the volunteers (and more to be done still!). New ftpupd.exe version that now can handle large file sizes correctly (e.g the all day video uploads)
22nd Feb 10.37b build 05 Fixes rain double up on start up with the Irox /Honeywell station with the data extraction at start up. Added more spanish/french /German and Dannish language translations. Added ability to customise the Large Display now.
19th Feb 10.37b build 03 Fixes high cpu use with the new system tray icon problem. Added option to alternate the data on the system tray icon.
18th FEb 10.37b build 01 Now you can customise the tray icon colour, (setup, misc/advanced) and it now also shows a decimal place for temperature :)
17th Feb 10.37a build 32 Fixed bug introducd for max solar radiation for time of day/solar % ,etc. Metar condition in clientraw data for current conditions now does not include coud height info. Fixes rain graph long decimal place for scale problem with certain rain totals.Build 34: last years wind and temperature plot now OK on the wind/temp/rain trend ( needed fixing after that was made a last 31 day data some time ago). Fixed the recently added new monthly rain tags (e.g %janrain%)
16th Feb 10.37a build 30 fixes solar on client mode (you still need to set the lat/long correct in the solar setup and in the sun moon setup and turn the solar switch on)
16th feb 10.37a build 29 .zip More translation done (German, french, and some Dannish now added).Fixed rain last 31 days for WDL being 1 day out of sequence.
15th Feb 10.37a build 28 Fog icon low windspeed threshold setting added to summary image and icon setup. Moviemaker.exe only now produces a logfile if that is setup (in the all day video setup), as the logfile being produced was causing crashes in some setups. 1 wire snow depth sensor now working good.Bug fix for the use of the lat/long in the solar setup for the max solar radiation for time of day (-/+ was being used wrong way around in the code for the longitude)
15th Feb 10.37a build 27 Added ability to set the new spike check limits and time out, to the Offset setup. The extra sensor graph more sensors is now updated to the internet along with the extra sensor graph (if set to)
14th FEb 10.37a build 23 The ftp now uses default remote file names if they have not been set in the customise internet and file creation setup. Temperature being 0.1 C to warm below 0 F fixed for the davis VP
12th Feb 10.37a build 20 Fixes a bug with the 12 month rain total for WDL for January (bug occurred when no rain data for March)
11th Feb 10.37a build 18 Added ability to customise the system tray mouse hover weather info via custom tags (see under setup, advcanced/misc).
10th Feb 10.37a build 16 .zip fixes problem with 1 minute or slower updating weather stations with the logfile being updated 2x.
8th Feb 10.37a build 10 .zip update. Fixes a bug with the daysless, daysgreater than for year custom tags (e.g %daysTminyear<0C%)
8th Feb 10.37a build 09 (.zip version) ELV WS500 history data extraction working good now
7th Feb 10.37a build 08 Improvements for the ELV WS500 history data extraction. Override sunrise/set hour for all day movie should work OK now
6th Feb 10.37a build 02 Simplified the code for handling the data from all the different weather station types, so now 1 wire windspeed and 2310 station type works Ok now. curr6hourgraph.gif now is created and uploaded OK (option in the customise internet and file creation setup).
5th feb 10.37a 30 second time stamped file now works for 3rd party web cam setup. Changed the main 1 minute agerage of data routine (simplified the code...more work to do on that)
2nd feb 10.37 build 20 Fixes glitch for extra temp4 on the extra sensor real time graph when you open and close that. Should be better for 1 wire windspeed with a 2310 station. Main screen custom tags : you can now set test before the tag. Should fix the last day of the month time stamped graph file
2nd Feb 10.37 build 19. Improvements for the Irox station for the extra temp/hum handling.Added minimise to tray for right mouse click on the main graph so that Vista users can easily minimise to the tray.
30th Jan 10.37 build 16 Fixed daily snow total in detailed noaa report wrong for inches of snow (was reporting CM of snow).Fix for Vaisala WXT510 windspeed. Buil 17: fix for view, metar images causing an error
28th Jan 10.37 build 13 Now works correctly for the skyview data logger .csv logfile import. More improvements and fixes for the all day video. Added option to show windspeed to 1 decimal place or not in the units setup
27th Jan 10.37 build 11. Added otpion for screen shot to not include the graphs. Added option for weather report email to send at sunset (good if you have the webcam image as an attachment). Increased by 1 hour after sunset for the cut off time for the all day video...so right up to complete dark (maybe might have to make as an option how long past sunset hour?)
27th Jan 10.37 full install update: new moviemaker.exe , fixes video last hour not being uploaded (was fixed earlier, but change was not saved and PC was restarted). 2nd web cam with the wdwebcamcapture now working (tick to enable, then restart)
26th Jan 10.37 build 10 Fixes the Noaa 5 day forecast after noaa made changes. Yesterday max/min temperature now works correctly for when data extraction overnight is gathered (i.e WD not running during the daily reset time). Also, conditions at night in the current conditions now on by default (e.g "Dry")
24th Jan 10.37 build 04 Now WD gets missed history data from the Irox/Honeywell station :)
24th Jan 10.37 buld 03 More fixes/improvements for moviemaker and wdwebcamcapture/all day video setup. Fixes yesterday max temp bug I introduced.
18th jan 10.37 build 01: 5 day forecast Ok again for NOAA forecast (wxsim additions had upset it) . Improvements for the separate iroxdata and wmr100 programs
17th jan 10.37 added moon description custom tag.New moviemaker.exe fixes crashing problem.Improvement made to the ftp program to stop file sequence problems.
17th jan 10.36z build 19 Fixes ten second file name copy for ten minute web cam image (now that WD controls movie maker is in use). Windchill will not plot above 10oC now on the graphs unless you set to allow that in the misc setup
16th jan 10.36z build 16 WD now controls moviemaker instead of wdwebcamcapture (you need to use the updated wdewbcamcapture). This is so that I can more easily improve the whole all day video sha bang
15th jan 10.36z build 13 Improved wxsim 5 day forecast. Fixes bug with %daysTmin<-15C% custom tag
10th jan 10.36z build 11 Changed the default aprs servers used (rotate server is now the default).Improved the wmr100.exe program
5th jan 10.36z build 10 Irox/honeywell update: now uses the usb.dll file: much better !
4th jan 2007 10.36z build 09 Added more data to wunderground (if you have those sensors), e.g solar/uv/soil temp/soil moisture/leaf wetness. Made improvements to the 5 day forecast from wxsim output. Added average rain custom tags.
4th jan 2007 10.36z build 06 Separate .exe for the WMR100 station (wmr100.exe) to get the data now. THis solution is working well now.
2nd jan 2007 10.36z fixes for OS WMR100 : now uses the supplied usb.dll file, much better alround!
30th Dec 10.36y build 11. If you click on cancel in the colour or font selection, its now not used.
29th Dec 10.36y build 10 Added option to update data for 3600 station every 30 seconds. Fixed bug with reboot pc if no data for 10 minutes option with USB data type stations. Buil 10 update: now correctly uses the daily rain total from the vws data.csv file
28th Dec 10.36y build 09 . Buf fix for ELV WS300 for barometer and rain. Added 30 second HTTP download option (good for IP webcams).Logfile fix for cambell scientific station
24th Dec 10.36y build 08 update:Fixed bug with temp/hum graph on autoscale graph for 24 hour graphing period.Bug fix with hours of frost custom tag.Also fixed bug with plotting UV on main screen graph for when oC in use and temperature are close to or less than 0oC
23rd Dec 10.36y build 08 Now works with WXsim for th e5 day forecast...see that option in the 5 day forecast (select the plaintext.txt file in the noaa ftp download to use for the 5 day forecast and then click on the main screen icon)
22nd Dec 10.36y build 05 LED alarm will now carry on flashing (and reset after 1 hour) for all time records and not just weather warning alarm thresholds.New feature added: ability to create .swf flash movies via the moviemaker.exe (new versions of moviemaker and wdebcamcapture needed with the full install)
21st Dec 10.36y build 03 Fixes dusk not changing to nighttime bug
20th Dec 10.36x build 19 . Fixes noaa warnings emails not been sent again after first time if time between sends is greater than 2 hours. Fixes maximum average windspeed not being remembered after restarting WD
19th Dec 10.36x build 16. Rearranged tbhe input daily weather, and you can now enter the current conditions (e.g if staionless mode)
18th Dec 10.36x build 15 Fixes a bug with the windchill on the web table.Also strips out control characters from the noaa metar conditions option in the clientraw file for solar description. 3D trend graph now not 3D, easier now to compare other year plots
14th Dec 10.36x build 14 Fixes the clientrawsolar description and each setting option now works ok day and night.Option to use different remote directory in the customise internet and file creation setup now works correctly (for new setups) (with the new ftpupd.exe version in the full install). Instromet average windspeed now better. Fixes recreation of the averages/extreme page for the current month, NOAA 5 day forecast working better again.Web page search function now works auto.
12th Dec 10.36x build 10 Fixes metar icon (in the metar window) not updating (after some changes I had made)
11th Dec 10.36x build 09 Fixes introduced problems with the graph history. Cm snow input from input daily weather on the main screen rain area fixed.
8th Dec 10.36x build 01 Fixes solardetail and snowdetail upload with the daily averages/extremes if using jpg images option. WMR100 should show temperature correctly below freezing now. Fix for 3D temp/wind /rain plot for last year temperature/wind. Added check to close any moviemaker.exe program still running, and also used this new method to closes the fetch3600.exe for the lacrosse 3600 station. Metar data should update better now. Fixed solar % ploting on solar real time graph for WS2010/WS2500 stations
6th Dec 10.36w build 10 Added current snow depth to the clientrawextra.txt With the WMR100 station, if the USB connection is removed or lost, and then re inserted or found, then WD will be able to carry on getting data now (would not before)
4th Dec 10.36w build 08 Added ability to use modified rain gauge with the 3600 station. Added new 6 hour web graph option to the customise internet and file creation setup. Average windspeed for the year custom tag added.Also you can now use a vortex anenometer with the a Davis VP.Solar description works better for 1 hour after and before sunrise/sunset (does not use a 10 minute average over that time now). Also fixes bug with after going to input daily weather, the text scroll on the main screen appears where the date was.
1st Dec 10.36w Build 05 full install. Fixed bugs with the FTP noaa download, the ability to select different download locations now works, and the ability to set different times to download for setup #2 and setup #3 now works too (check that you have not lost your download times) (includes new ftpupd.exe version). Fixes cant create clientraw.txt file error (occurs after that file is now in UTF-8 format).Yesterday rain for Cambell Scientific station now also fixed (new update). WD now rejects the La Crosse 2310 false windspeed reading of 25.5m/s spike.
29th Nov 10.36w build 02 full install: Now you can save customisation of postions/size of objects on the real time graph.Also fixed crashing of the moviemaker.exe, with a new version of that.Fixes yesterday rain for the ELV WS500
29th Nov 10.36w zip update: fixes clientrawetra.txt not being updated after changed to UTF-8 format (for language characters in WDL)
27th Nov 10.36v Full update: New Ftpupd.exe version, now better info on local-> remote filenames, and checks for no remote file name and also should stop the list out of bounds error.New clientrawrealtimeftp.exe, to work with the real time webcam upload (bug fixed there)
26th Nov 10.36u build 27: Language characters in the clientraw files will now show up in WDL (the clientraw files aer now in UTF 8 mode) :)
Added option to still show snow data on the 3D graph plot (via temp/wind /rain trend)
23rd Nov 10.36u build 23: Fixed a introduced bug with if using the tide setup, the web page/ftp was updated every minute
22nd Nov 10.36u build 21 : Now works much better with the Vaisala WXT510 , i have been able to work with a remote system, now you can select that the data is in non metric. Next I will WD to auto detect the units of each parameter instead.
21st Nov 10.36u buld 20: Added custom image #3 to the current condition area of the main screen setup
21st Nov 10.36u build 18 update: Fixes the indoor temp/hum from the ELV WS500 not working correct from extracted missed data at start up
21st Nov 10.36u zip update: wind energy hours now in 00:00 format. Fixed a bug with the logfile being lost when editing the log file in the view, averages/extremes, edit the logfile (affected US units log file).Fix for the auto scale graphs too.
20th Nov 10.36u build 18: removed the sunshine hours from the tempwindrain trend 3D graph (its a duplication that is not needed, as its available on the solardetail.gif image
20th Nov 10.36u build 16: fixes the time selected in the general ftp setup via the time picker not being saved
16th Nov 10.36u build 12 : Fixes a glitch with the view, solar detail for sunshine hours and max solar last 31 days. Now a vortex anenometer with a 2310 station works correctly. Heathkit solar instead of indoor humidity now correct.
14th Nov 10.36u update (build 09): Now the graph max gust correctly plots the max gust, as it now checks back in time, so longer graphing intervals means no missed gust plots.
12th Nov 10.36u update: The recreate the last 31 days data file now works correctly.Also fixes an introduced bug with the time/date in the wxnow.txt file
11th nov 10.36u update: Fixes with the auto scale graphs. FTP program handles lost internet connection better for Hamweather data sends and some other functions.
11th Nov 10.36t update: Fixed current conditions report on the summary image
9th Nov 10.36t update: Fixes graphs not updating when in client mode and read only set for the graph data (problem happened after graphs now use the last 31 days data file).
8th Nov 10.36t update: Added rain last month and last year to the trends. Also added alternative method for jpg creation via the 3rd party web cam setup (now no image quality loss and image size set by the image size setting and not the file size setting (much easier to get the correct image size of moviemaker).
7th Nov 10.36t update: fixes wind energry not updating for some weather station types. Added LED's for file upload switches in the customise internet and file creation setup.WMr100/Irox USB should get connected better now at start up.Change in day and change since dec/june custom tags format now better.Also improved the setting of the icon as webcam image ...added ability to set the image to use (and override)
6th Nov 10.36t update: Recreate the last 31 days data file now works much better
5th Nov 10.36t Fixes an introduced problem with some files not being uploaded with the customise internet and file creation setup
3rd Nov 10.36s Added ability to set times to create and uload the conditions colour image independently from needing the gizmo created/upload, in the customise internet and file creation setup. Added ability to set the directory location and filename for the all day video setup in WD.A few other fixes and improvements.Also added ability to copy the all day video .wmv files to another directory (if using WD to update). Update: now the 1 wire HUB is allocated and detected and in use correctly at start up, automaticly, if using a 1 wire with another weather station.
31st Oct 10.36r update: Fixing problem of different USB devices with the Irox/Honeywell and OS WMR100 stations. Added temppanel.gif to the customise internet and file creation setup
31st Oct 10.36r zip update: Now you can import the Skyview software data from the skyview data logger from the file the skyview software has updated 9date stamped .csv file)
30th Octo 10.36r update: 24 hour wind dir plot OK now. Changeinday custom tag now works correctly, as does change in time since Dec or June
29th Oct 10.36r zip update: Fixed a bug with having web cam image as separate image at night time on summary image not showing up (and not as separate image). New update: now the wind direction plot for stations with only 16 data points is a rolling 10 minute average...much better. Also, sunshine hours are now in the format HH:MM
28th October 10.36r update: Last day video time overide for sunset/sunrise with wdwebcamcapture now works again Ok (latest update of that with the full install).SYNOP fog now works with the fog humidity threshold in the summary image and icon setup properly.
27th Oct 10.36q : Fixed night time condition. Fixed 12 hour web graph. Added support for the OS WMR100.Problem with high latitudes and error with sunrise/set calculation fixed by setting maximum COS value in the routine (but for best results use the separate high latitude setup if above 63o latitude). Gust last hour for station types with data updates 1 minute or slower should be fixed.
26th oct 10.36p udpate:Works correctly for the ELV WS500 for missed data extraction, and also for daily sunshine hours too.
25th Oct 10.36p Fixes some icon inconistancies after clicking on the main screen icon or with the screen capture (especialy if a metar used to set the icon)
25th oct 10.36o The graph correct now works correctly (use the setup at the bottom of that screen), after the combining of the graph code into 1 procedure. New wdwebcamcapture version: let me override the hours for all day video should work again OK
24th Oct 10.36n Graph issues introduced in the recent updates should be OK now after i combined the graphing code into 1 procedure.
24th oct 10.36m zip update: Added ability to set graph data font/size. Added ability to set which extra temp 1 wire is shown in the web table.
Added option to set what data appears in the solar description at night time. Fog and windy icon should work ok now during the day of icon from solar in use.
23 Oct 10.36m update: Added 8 more custom tags for the custom screens,and 5 more for the main screen. Fixes an introduced bug with the sunshine hours last 10 minutes, and weekgra.gif
21st Oct 10.36m zip updatet: Fixes indoor temp scale pointer at mouse graph position not changing. Option to plot UV on temp/hum graph instead of THSW added.Fixes the days on the solar detail graphs for the web image.
You can now plot sunshine hours (i.e set to plot solar on the graph) for if a Irox/honeywell station.
19th Oct 10.36m Awekas direct data send (via HTTP) now works correctly (fixes windspeed problem, and adds other data)
18th Oct 10.35L update: Fixes the 24 hour date stamped graph for the aveages/extremes for the month (was incorrect for when language other than english in use). Also should be ok for the end of the month change now (but I will test that soon)
18th Oct 10.36L Update: Option to let WD control movie maker now works OK. Added ability to set the correct comport number in the open3600.conf settingf file for using a 3600 and the fetch method.Recreate the last 31 day data now works much better.
17th Oct 10.36L Fixes bug with wind direction for 48/72 hour graphs on the main screen (bug happened after change to using last 31 days data file)
16th Oct 10.36k zip update: Fixes #2 setup weather report email tuesday not be able to be unticked (will not save). Also the days on the bottom of th e sunshine hours and max solar graphs under view, sunshine hours, is now correct (now that the graphs show the last 31 days data)
15th Oct 10.36k Full install. New wdwebcamcapture.exe and moviemaker.exe and Weatherd.exe option to let WD control moviemaker should work now. Also added option to upload date stamped all day movie to web site, see in the webcamcapture program. Added ability to set the LCD colour on the large display
15th Oct 10.36j 3D graph with the temp/wind/rain trend now has the correct day numbers (for the days for the last 31 days). Pointer for temperature scale will now show if new option to show pointers at mouse position on graph in use (see in graph setup). Colour setup screen tidied up.
13th Oct 10.36i Added otional wunderground rapid wind/gust swap (so the wunderground rapid fire flash graphics have speed and direction around the correct way (but then the graph and table are around the wrong way)
also added optin to show pointers at mouse position on the graphs, to the graph setup (misc setup section)
12th Oct 10.36h Main alarm and mouse over hint/records set should work better now (and correctly time out after 1 hour).Also WD generated metar now has sky conditions based on your solar reading (if you have solar setup). Update: current/vs average speed chart and wind rose works for month to date reselection now
10th Oct 10.36g update: Now the 30 second time stamped web cam image override works with the need to also have the animated web cam image being created /uploaded as well.Fixes 24 hour wind trend units for when kmh used.
9th Oct 10.36g update: More french language added. More tidying up of setup screens (advanced internet setup,graph setup etc). Sunshine hours adn max solar graphs under view, sunshine hours now for last 31 days.Email report subject date now day/month/year if that is set in WD (new ftpupd.exe version with full install)
9th Oct 10.36g zip update: Sunshine hours on 3D graph via temp/wind/rain trend now last 31 days like the other data (i need to also convert the solar detail 3D graphs to use the last 31 days data too). Wunderground rapid fire, i have now swapped windspeed and gust around, as they are using the data wrong.
8th Oct 10.36g zip update: Added spanish VP forecast text option :) (Thanks to Paul Padron). Zip Update: added ability to upload a file to the , action, manage my FTP server, and fixed a bug with changing directory once more than 1 directory up already.Warning emails now not sent to sender as well (you will need to add yourself to the list)
7th October 10.36g update: Fixes introduced bug with the date stamped daily graph file not being updated. Updated 10.36g zip :now fixes the windspeed chart under view, averages/extremes not working.
1st oct 10.36g Fixes a few bugs with the web graphs that were not correctly using the new 31 day data file (i.e so the graph does not start again at the start of the month)
1st Oct 10.36f Update: Fixed position of temp/dew data on the WD mesomap.Also tidied up the solar setup screen. Also fixes icon from metar at night time bug introduced.
28th Sep 10.36f, fixes bug where the screen shot image was not being uploaded, introduced in 10.36e (I was fixing a bug with the thumbnail creation of that image). Also the %rainweek% custom tag now reports the total rain for the week correctly (10.36f full install). Also html format set emails OK again now. .
28th Sep 10.36e Fixes the Sunrise appearing on WDL all day long. Tidied up the com port setup screen.Dew point added to WD's mesomaps
25th Sep 10.36b update: Tidied up the offset screen. Added ability to set the size of the conditionscolour.jpg image. Added new custom tags: >< days tags to use the logfiles.
23rd Sep 10.36b zip update: nexstorm lightning count email theshold now works again. Fixed introduced issues with the solar description. Also added max gust warning email threshold setup
22nd sep 10.36b Bug with minutes either side of sunrise/set tiem to show the sunrise/set icon (and also bug wtih not then becoming nighttime after that time period (in the summary image and icon setup) after sunset, fixed too
21st Sep 10.36a update: Bug with no rain reported for weather description when solar set to update the icon used, fixed
18th Sep 10.36a Fixes a bug with the first time or recreation of the new 31 day data file. Honeywell/irox USB station now working really well (but I still need to fix issues where there are multiple USB HID connected), and now with this new 10.36a update, it WD will now read below 0oC. New ftpudd.exe version: attachments in emails should work again (and now correctly), but, the actual text is also an attachment.
15th Sep 10.35z update: The wind/temp/rain trend is now the last 31 days always (now uses the new laast 31 days data file).Much better.
15th Sep 10.35z: Fixes the 24 hour windspeed graph for WDL if you have ticked to use average speed last hour for the 24 hour graph in the webfiles/web page setup/real time ftp setup, in WD
14th Sep 10.35y : New, now you can set to not have to do the screen capture resize to smaller screen if you set to use the thumbnail generation in the advanced internet setup, and tick to use for screen shot there (you need to install the full version). Solar option to fine tune setting fog icon added.Added 5 day forecast to the advanced internet setup (#40)
14th Sep 10.35x update: Using the vws data.csv file, now rain works correctly. Also added thumbnail generation to the advanced internet setup
12th Sep 10.35x update: the WDL clientrawdaily.txt file now uses the new last 31 day data file, so the data should be alot better now.
New clientviewer version, new features added (note, choose any file in the WD data files folder)
10th Sep 10.35x update: Fixed the custom tags above tag # 10 main screen font/colour /size not being the same as the other labels on the screen
8th Sep 10.35x update: Fixed some problems with extra space in the clientrawextra.txt file. New clientviewer program version: now has WD style graphs, adn you can view the latest web cam image or movie, and you can see the latest nexstorm lightning plots on a map too .
6th Sep 10.35x Update: Fixed the otpion for each file in the advanced internet setup , upload times, to set to use the remote directory (you will need to reset this option for each file (now works where you can independently set each file this option). Also, the 24/48/72 and 7 day graph now use the new 31 day data file, and the start of the next month will start the month data file fresh data (so no more start of month issues), the trend 24hours now uses the new 31 day data too (I will run a test soon of the whole end of month/start of new month averages/extremes too (also the max solar on the solar detail graphs for the last day of the month will be fixed now too for when 9am reset used). Also the Honeywell/irox direct access routine works better now.
5th Sep 10.35x update: Fixed the viewing of the logfile (under view, loged data) sometimes causing a crash. Fixed barometer spikes at start up if using the CWOP altimeter barometer for WD's data.
4th Sep 10.35x update: Fixed non zeroing of windspeed for when Vortex anenometer in use. Fixed an error with the month to date graph if THSW set to be plotted (and now plots last 30 dayhs (less cramped). Added that if indoor temperature plotted on the windspeed graph, it uses the max/min values set in the graph setup. Fixed set the max temp/windspeed/current spwed font and colour not being kept after a program restart. Added direct support for the Honeywell/Irox USB station (no need to run the weather capture software anymore (exit that).
29th Aug 10.35w Monthtodate graph is now always the last 31 days (best to upgrade now before the end of the month so you will have complete data next month). Wind direction graph new month bug fixed.Also added all time records event log (see the file where WD is installed)
28th Aug 10.35v update: Fixes bug with remote directory and remote filenames for the wxlocal5 and above files with the advanced internet setup
26th Aug 10.35v Fixed the current vs averages graphs not showing under view/averages/extremes for when , instead of . used for decimal place in windows regional settings. Also improved alignment of text on the control panel for when German language in use. Fixed the new VP forecast scroller not showing if the screen size had been customised.
25th Aug 10.35u Update: Solar description should now still work correct if raining...
24th Aug 10.35u Full install update: new wdwebcamcapture version, fixes a bug with some lost settings at start up
23rd Aug 10.35u update: Fixes rain for the honeywell/Irox stations (when using the records.txt file). Also, new version of the ftpupd.exe program that is now fully compliant for sending emails (and so html format is now fully supported)
22nd aug 10.35u update: Fixes the rain for the month in the av/ext report on the last day being 0 (for when that report is created on the 1st day of the month). Update:fixes the line through the words when using skins.
21st August 10.35u Fixes introduced bug with noaa rain totals in the view, av/ext noaa style report, and trends, temp change last hour (for oF). New update: fixes weather warning rain last hour and rain last 6 hours setting not being remembered on start up
20th Aug 10.35t Important fix for the trends for 24 hours ago (which will also fix that disappearing at the start of the month)
17th aug 10.35s Date of last rain now follows date format settings in WD. Starts hidden in system tray again now (if selected to)
17th Aug 10.35r update: New VP forecast scroller on the main screen. Much improved :).
16th August 10.35r update: Fix for main screen fonts for when the screen size if large and use full screen is in use. Solar works corret now with a texas wr25 station
15th August 10.35r update: Fixed a parsing error with custom tags (affected the detailed noaa report at times). ELV WS500 missing data extraction at start up works now.Custom tags for days with temperautre< or less than thresholds now converted
to use the datafiles (much faster). Also added more tags for 44,47 and 49oC
13th Aug 10.35r full install update: Added support for ELV WS500 station (USB)
11th Aug 10.35r: Fixed a bug with the change in the degree symbol (affected the time of next update on the default web page)
9th August 10.35q: Changed the degree symbol in the default web page so it works better on all web servers (no more ? ). Also added custom auto scale graph #5
8th August 10.35p zip update: Fixed the month of the extremes under view, averages/extremes, records to date for the year clicked.
7th August 10.35p update: Fixed underline adn bold font combination not being remembered. Fixed a bug with the fog icon showing when its too windy to have fog (new updated 10.35p zip), also, the arrow to hide in system tray does not disapear now (as the current data along the top does not update while the program is "maximised"
5th August 10.35p Climatedatayear (detailed noaa report) now works correctly...and at end of month report,you need to coy the updated climatedatayear.html file to your web files folder
2nd August 10.35n Update: new version of the moviemaker.exe, now works OK with the Logitech type webcam again.Some more custom tags added (trend tags)
31st July 10.35n update: Added all time records days with no rain (use custom tags to access that value). Added ability to plot VP soil moisture 3 and 4 on the customise extra sensor real time graph. Fixed bug with conflict with the save as jpeg file as well in the 3rd party web cam setup
25th July 10.35m Full install update: Direct web cam capture direct streaming now works with file save as well again, and custom tags now work for the overlay of network streaming only in use (new WD version needed). Fixed glitch with the 5 day forecast. Improved the data extraction from the davis WMII. Added last 10 minute, based on every 10 second, web cam movie ability to the direct web cam capture program
22nd July 10.35m update: Fixes the %monthtodateavxxxx% custom tags (was only averaging the last day and not the month to date)
21st 10.35m zip update: Fixes a sometimes CRC error with the Ws2010 data.Also noaa 5 day forecast parsing should get all the forecast ok now
20th July 10.35m, update: 5 day forecast text cut off issue should be fixed now. New nextorm option in the lightning graph now actualy visible to be ticked! Also added ability to set the jpeg quality for the 3rd party web cam setup (default is 95%, which means lower file size)
18th July 10.35L zip update: Fixed some issues with the 5 day forecast parsing. Added option to set current conditions from lightning strikes in the lightning graph (nexstorm users). Added option to have tide graph at top of the web page. Added ability to separatley set the gust (current) speed offset.
15th july 10.35L update: Fixed long standing bug with the time on the data when getting missed data from a WS2010/Ws2500 station...also solar from that data should update with the WS2500 too now. Also fix for missing day temperature on 3D graph under view, temp/wind/rain trend fixed for when oF used.
14th 10.35L update: Fixed the manual screen size % not working on WD restart. Fixed bug with sunshine hours
13th July 10.35L update.Fixed a bug with the davis VP data extraction...where it would get stuck and the same record was kept on being updated to the log/date files over and over
12th July 10.35L zip, updated: fixes introduced bug with the wind direction for the max gust and max average for year to date and month to date all time records being reset to 000 (even after you set them correctly via action, enter my own all time records). Added rain last 10 minutes to the rain detail screen.Added ability to view record wind run to the all time records screen
6th July 10.35L update: Inspeed vortex now working and reading great :)
1st July 10.35L (Updated): Fixes bug with day 21 temperature on the 3D wind/temp/rain graph for when oF used.
30th June 10.35k Fixed a bug with the wind direction in the view, averages/extreme (NW showing instead of N). Started work on customising graph 5 in the auto scale graphs. New data zip backup program: now the registry setings are correctly exported if you are using 2wd.txt (or 3wd.txt, etc). Also fixes a introduced bug with the year to date records being reset in a revisd 10.35j (WD now checks that the all time records for the month or year have been reset at month/end change)
27th June 10.35j update: fixed bug with the selected single day of data under view, averages/extreme
26th June 10.35j updated: now norway language for the forecast from the davis VP option added
25th 10.35j Rain totals now stored in the regsitry (so data not lost if the latest.inf gets corrupted after a crash or windows reboot/power fail, etc). Fixed a probable crash cause after 7 days with the ET and solar calculation (also caused the ET calculation to every day get more and more incorrect).
24th June 10.35i, update: 2nd labjack temp/hum sensor now supported (you need to enable that, and use enable lines connected to IO2 and IO3)
23rd June 10.35i, update Fixes double rain with a 3600 and heavy weather file in use.Should be better for ultimeter 2000 in complete record mode.Added option to have 1 hour average windspeed for 24 hour windspeed in WDL. Added option to have icon number to WDL set to day 1 icon in the 5 dfay forecast
19th June 10.35i Fixes problem with new thumbnail viewer in the customise internet setup (you need to install the full version). Added option to produce tide graph in the tide setup
18th June 10.35h Fixes introduced glitch with the sun rise/set
17th June 10.35f, updated version, Skins now availble. Also new memory manager in use, should help with memory use (more stable memory use now, which is good news).
15th June 10.35f Fixes 24 hr indoor temp graph on WDL Also adds more info for next release of WDL (THSWI and trend data). Animated gizmo file size reduced.
12th june 10.35e full update: new wdwebcamcapture, now has shadow for text, making it easier to see, and you can now also increase the font size
11th jUne 10.35e update: fixes bug with size of the weather dials screen at start up if you have customised that screen. Fixes bug with bold+italic font. Fixes zeros for rain in detailed noaa report.
10th june. 10.35e Fixes 3 zeros for time when using 24 hour time format in the daily hi/low readings. If using VP altimeter baro for WD readings, then 1 minute forced baro update will still work now
Added option to set a background image for the summary image for night time use.Metar.gif (or metar2.gif, metar3.gif, etc)now correctly uses the customisation of metar 3 .
FTP port for clientrawrealtimeftp.exe now correctly set to what is set in the connections setup.Use of sea level barometer with a WMR968 station now is OK at first program start up.
18th May 10.35c Should fix a problem with rain doubling after the data extraction from a la crosse 2310/3600 station. Customise/advanced internet setup
re done (looks less complicated...click on set buttons to see more options). Added option to show time along the bottom of the graphs as 12 hr with am/pm, see in the graph setup
15th May 10.35b log file settings now improved setup screen. Averages/extreme web page daily rain fixed now
13th May 10.35a Fixes screen size when using animated main screen (and when using % increase of main screen new option)
6th May new 10.34z Note that the default install location is now c:\program files\wdsiplay
so make sure you change the installer to install to the location you normaly use (e.g c:\wdisplay). A new 10.34z will now remember the last installed location. Now the daily setting of the Davis VP console time to the PC time works again. Also
max daily gust with 9am reset bug ith a Davis VP fixed now (WD was checking the console max daily gust (but which resets at midnight (WD now checks the time of the max daily gust too))
5th May 10.34z Fixes teh screen sizes isseus (liek for the web file images dials image and large display image), and also adds option to set the screen size % above normal too
3rd May 10.34x Fixes (hopefully) a crashing at noon and midnigt or 9 minutes past the reset time. Daily rain should be ok in the averages/extremes too.
Added a log file data file alignment checker to the view, averages/extreme, correct the data. VWS import now correctly saves to a US untis log file
1st May 10.34v Data alignment in the averages/extreme/noaa style reports better. Some other minor fixes and improvements and various parts of the program (inluding a couple of end of month minor bugs fixed),
and dirplotmonth.gif fixed and percentdir.gif Wunderground downloads for mesomap data works again after wunderground changed the URL (but you need to remove the word weatherstation from he URL in the mesomap setup)
26th April 10.34u Now correctly works for when setting to use large screen for screens that are extra wide.
Also fixes an error introduced with the 3600 type station. Should be less CRC error problems with 2010 type stations.
25th April 10.34t FTP selected files to other FTP servers in the advanced internet setup now works correctly,finaly!.
Fixes rain units in the new rain graph and rani vertical gauges for inches rain
23rd April 10.34s Fixes percentdir.gif Should be better for WS2010 users with less flat lining.
20th April 10.34s Fixes dew point line disappearing on graph after viewing last 7 days or last month (if no indoor hum set to plot). Fixes FTP to other FTP servers in the customise internet and file creation setup). Some more custom tags added (like all time max rain rate)
17th April 10.34q Start up sequnece for the 2310 improved. Last day of the month in the averages/extreme should be OK now.
13th April 10.34m Support for the new Honeywell TE923W station added. Fixed a bug with the FTP to other FTP servers in the customise internet and file creation setup. Fixed some more bugs with the view, averages/exremes. Windows up time tag now works OK past 30 days.WMR968 users can now set to use the sea level barometer on the console.
10th April 10.34k Fixes daily rain data for averages/extreme and 31 day rain data for WDL
7th April 10.34h A couple more fixes for the detailed noaa year to date report (use the new climatedatayear.html file and put in your web files folder)
6th april 10.34f Fixes up problems with the 31 day graph data for WDL (and also should stop crashes of WD when creating the clientrawdaily.txt file towards the end of the month that some people have been having (it now uses the data files)). A bug with the sleet conditions instead of snow conditions being reported fixed.
6th April 10.34e Fixes oF temperature bug on the 3D wind/temp/rain graph. Noaa warning not cut off any more now.Some other fixes/improvements for the view, averages/extreme
5th april 10.34d more fixes for the averages/extreme/noaa report/detailed noaa report, Snow total and sun shine hours total sould now be OK in the year to date reports. New WUrapidfire.exe version, should be better.
4th April 10.34b Fixes serious bug introduced in 10.34 (dont use that version). You will need to recreate the data files from the logfiles for each month of this year (i.e 12006lg.txt, 22006lg.txt, 32006lg.txt, 42006lg.txt). Sorry about the hassle there!
3rd April 10.34 Averages/extreme/noaa reports more bugs/glitches fixed. Client/server bettwr where client shares the datafiles. Update the noaawarning separate .exe to use the new clienraw location. Solar description now based on last 10 minute solar %, bug fix for texas instruments station baud rate setting. Fixes missing day 1 on the time line for the 48/72 hour graphs (updated version of 10.34), icon on metar will work now if metar not used to update the summary image icon (updated version of 10.34)
1st April 10.33x Fixes problems with the averages/extreme/noaa reports auto generation for the 1st day of the month (after the change to using the graph data files)
30th March 10.33v Fixes a bu with the wind direciton under view, averages/extreme (after using the data files that happened). Added ability to set font/colour of the clock on the custom screens (uploading that now).The 2nd clientrawrealtime now restarts the correct file (realtimeftp2.exe). I still need to fix the WUrapidfire.exe not starting up if already running.
29th March 10.33u Fixes a problem with win direction % plot, and an access violation with the daily averages/extreme routine
29th March 10.33t now does not start up the wurapidfire.exe if already running, and finally, it wont now start up a 2nd copy of the 2nd clientrawrealtimeftp (you need to however update the realtimeftp2.exe version you use, included with the full install),also, i finally found where the +hour or 0 hour offset for the tide prediction was back to front...!
also, i also have added the current conditions to the trend screen now too. Also, now stores the wdisplay.ini settings file where you have WD installed (it should auto copy from where it was installed before). Also fixes the wundergroudn almanac, which works faster now (and should stop the crash at 4:05 am that was producing)
27th March 10.33p 31 day data for WDL should be OK now (and now handles a month with 28 days before hand). New: I re worked the icons code: now handled much after and more efficiently. There should be less in consistancies with the icons (but maybe a few introduced bugs)
23rd March 10.33o zip. The wdisplay.inisetings file is now stored in the documents and settings folder, to avoid conflict with virus checkers. New: wunderground rapid fire now uploaded via a separate .exe, to avoid conflicts. New: control panel and view panel now always in memory.
13th March 10.33K New version of the xml warning program: now works much faster. Windspeed graph under view, averages/extremes works again now, and last months last day works now (still a bug if using 9am reset to fix there though). Option to not plot indoor humidity under the graph setup now works correctly.New Ftpupd.exe version with the full install fixes a bug with the CWOP/APRS data sending.
11th March 10.33h The bugs should be nearly all sorted for the new method of the averages/extreme and noaa reports (using the graph data files), which is much faster (and now the year to date in the view, averages/extreme is done very fast). Thanks for peoples help and patience with getting the quirsk and bugs (mainly to do with oF/oC conversion issues) sorted out. The changes should stop the towards the end of the month crashes with WD some people have had.
7th March 10.33a New faster view, averages/extremes routine.Now uses the graph data and the rain totals from the rain in detail sreen. I will add next ability to easily fix/edit the graph data. Will stop the end of the month crashes some people get. Added back the custom images to the custom screens (they wre not visible to set them up).
5th March 10.33 (updated version).Fixes wunderground rapid fire rain last hour. Added ability to have customisation of the summary image saved.Added random stunning special affects transition for selected custom screens (via the slide show setup). Added heat rain gauge option for setitng of snow icon in summary image/icon setup.
27th Feb 10.32z Fixes some icon problems (day/night). Fixes 1 wire setup page problems (no ROM id's). Fixes indoor temperature units.Added full moon custom tag (date only).Fixes a few bugs with the customise extra sensor real time graph.
23rd Feb 10.32x Now wunderground data is updated (at the next shedules update) with missed data extracted from a data logger.Added customise lines to plot to the more sensors extra sensor real time graph (new 10.32x)
The importing of .wlk davis VP data files now works much better, and the thresholds for spikes/bad readings in the offset setup now works with this import (and also normal missed data from a data logger , and normal live data, too). A few other fixes after a change in the default web page update routines. Noaa xml warning should now be OK for the time between emails of alerts (and the 2nd setup now works OK too (except I still need to get it to be able to send that email file). Works better with a 2010-13 data logger now.
20th Feb 10.32u Fixes week average custom tags data. Added total wind run to view, averages/extreme (which runs a bit faster now too). Fixed time along bottom of temp/hum uto scale graph for last 3 days customised. Cavok now reports as clear if in a metar.Fixed wunderground low temp records alamnac.
17th Feb 10.32r Fixes graph history start of temperature plot. Fixes noaa warning email resend hour time. Added to view othjer times easily when setting the times in the customise internet and file creation setup.
17th Feb 10.32q more added to cutmoise selection for extra sensor real time graphs. Sunrise icon shows on input daily weather if web cam for icon in use, now.
15th Feb 10.32o Added ability to customise and select which data to plot on the extra sensor real time graph :)
6 more custom tags for the main screen customisation added
13th Fed 10.32n Much faster when using custom tags, a good upgrade to do!
( WD was double dipping in work rate on that routine). Detailed noaa reports much better. Time stamped graph files for av/extreme should be Ok (and from when you recreate them too). Solar/Uv individual dial iamgs colour now remembered (it was using windspeed dial cokour)
12th Feb 10.32L fix for raindetail, solar detail , snow detail not updating with the daily averages/extremes (started in 10.32h). New climatedata .html template files, work better with -ve temperatures. Added support for Mobolix network camera FTP upload of raw Davis VP data (so no PC needed at remote site). Support added for ELV WS9000 station. Auto scale graphs time along the bottom improved. Added ability to re allocate extra temperature sensor data above sensor #4 to extra temp 1 through 4 (so that it will say show up in WDL, etc). Fixes %daysTmaxyear<0C% custom tag
9th Feb 10.32j Dial point on windspeed dials now has dampening in effect at the begining and end of the movement similar to WDL. Added option to set minutes past sunrise and before sunset to set icon from solar. Changes and fixes to separate wdwebcamcapture program
Detailed climatedata noaa file templates changed so better for cold temperature readings
4th feb 10.32h The time along the bottom of the auto scale graphs is much better, and under view, more sensors, those graps, and under the rain graph (individual dial images 24 hour rain graph). Added a todays log file viewer (see under view), and you can view other days and other days from other months/years too. HTTP web cam server now works (at least if you manualy start it up) in a new wdwebcamcapture version.
Noaa warning email now only sent every 12 hours instead of every hour.
3rd Feb 10.32f New data added to the trends for this time last year (and custom tags added for that). La Crosse 3600 hang up of fetch3600 should be better. You can now set the colour of the UV and solar individual dial images. Davis VP soil moisture and Leak wetness should now be OK for data extraction at start up for reb B data logger. Fixes for detailed noaa climate files
1st Feb 10.32e (updated version) Fixed memory leak with transparent gif images. Fixed the use different remote directories with the customise internet and file creation. Fixed a problem with the VP forecast when german language used. Addded extra temperature temp panels.Added time pick list for upload times for each setup. Added option to use 1 minute general ftp upload.
27th Jan 10.32a Added real time wunderground uploads option :). Extra temperature sensors with a ws2010-13 type staton should now plot correclty on the extra sensor real time graph 2nd (more sensors) graph
25th Jan 10.31y New moviemaker.exe works much better. Jan2006.htm av/ext now updating again. Improved routine for getting live data from a davis VP (might help with problems with USB data logger too). New temperature panel (individual dial images) added (and indoor temperature). A few other fixes and improvements.You can now customise the weather dials, and also 3 more custom tags added to the current conditions window. Added option to use altimeter from davis VP for main baro to the CWOP setup
19th Jan 10.31s Now works corectly with Instromet for wind direction! New wb cam capture program, now face tracking can be turned off for logitech 4000 , also new moviemaker.exe ,which now works if no capture driver present on the pc Missing dash in 5 day forecast custom tags fixed
18th Jan 10.31r Option to send more correct altimeter data from a Davis VP in the CWOP setup now works much better.Auto scale graphs you can now set width/height override for all. Also fixed windspeed label for custom auto auto scale.New icon: forecasticonmetar.gif added , which is the icon on the downloaded main metar.Some more custom tags,and the custom tags used in WD are now loaded in by a separeate file, tagslist.txt (do not delete or edit that file)
14th Jan 10.31m Icons from metar should be working better again now. Added option to force update of davis VP every 1, 5 or 10 minutes. Added option to send to CWOP/APRS Altimeter pressure reading from a Davis VP station.Some more custom tags added.New raingraph.gif added if using vertical rain gauges for individual dial images
9th Jan 10.31j Now Davis VP barometer updated every minute instead of only every 15 minutes!!!
Added new vertical style individual rain gauge images for web site (see in webfiles/web page setup, individual dial images setup)
6th Jan 10.31i Added all time records (max/min) for extra temperature sensors 1 through 3. They are available as custom tags.
Fixed a graphing bug for soil temperature as indoor temperature. Fixed main screen data colour not being remembered when wd starts up. Fixed wind direction word position not being remembered on restart of WD if main screen customised.
3rd jan 10.31h fixed the end of year bug, and also other change or month problems with the averages/extreme/noaa reports
2nd Jan 2006 10.31g Now the noaa warning is handled by a separate .exe program, as is the direct web cam capture.
Bug with viewing last years av/extreme data if NOAA style reports in use fixed.
Still to fix end of year bugs,that showed up, but will do that in the next day or so. METAR download setup now in its own TAB in the ftp/internet setup
19th Dec 10.31d You cna now select what the La Crose 3600 station's console windspeed unit is set to in the station type setup, which then fixes the windspeed readings when using the FETCH method. Added option to still calculate wind chill above 10oC in the extra/misc setup. Wind direction for max gust for the day works better now.Few other bug fixes and improvements. Using a 1 wire (or Vortex)windspeed with a 3600 now works.WD now auto detects if you are in daylight saving mode, and auto detects the time zone offset needed for the solar setup :)
15th Dec 10.31a Noaa warning should work better. You can now import PC_WS2000 software data files. ET % offset added. SUN forecast now will be clear night at night time.
10th DEc 10.30x Mmeory leak (with the clock used) found and should be fixed.Fix for Ultimeter below 0F temperature. More main screen custom tags added. Bug with -ve temperatures in the detailed noaa report fixed. VWS .csv file import works better. Some more custom tags added.Averaging of 1 wire snow deptch/soil moisture/leaf wetness now.Bug with plot VP soil temperature on 24/48/72 hour graphs fixed.
3rd Dec 10.30w dirplotspd.gif now created and uploaded along with dirplot.gif (shows speed/direction plot).
Should now work with a Vaisala TX512 ultrasonic station OK
Fixes a bug with the latest 10.30v and also the gust direction last hour should be OK now
1st Dec 10.30v Important bug fix for Nexstorm lightning integration uses. Please use this version, and you will need to delete the registry key, Latest nexstorm data new, from wdisplayftp.ini in the registry (the bug with that was introduced in vers 10.29d
Also added dirplot3.gif, which is uploaded with dirplot.gif, and is the dir vs speed rose
28th 10.30u Double rain amount bug for some stations types introduced a few versions back fixed.Should use slightly less memory too. Fix for snow detail graph units long number problem. 1 wire leaf wetness working better now. Davis VP leaf/soil on auto scale graphs should be better.
24th Nov 10.30q Last hour windspeed now works correct. Fixed a bug with the time/date for data stored just after midnight with a ws2010/2220/2500/8000 type station. Detailed noaa report now has difference from average working (if you have 2 or more years of data), and should upload a date stamped month file at the end of the month too. More work/fixes for customise main screen done. New speed vs direction plot via clicking on the main screen wind direction dial (see button right hand side there).VP forecast should now be OK for wind direction shift if you live in the southern hemisphere
17th Nov 10.30o fixes bug with extra temperature display for extra temperature from a WMR968 station for when oF, after I got the extra temperature offsets working recently. Full install now includes new custom web page templates, thanks to Tom of Carter Lake.
17th Nov 10.30n Fixes a problem with a crash after moving the mouse over the main screen, which was introduced when I added main screen customisation (see that under setup, extra/misc setup). Added more italian, and fixed some Italian words too.
14th Nov 10.30k You can now customise the main screen (see under setup, extra/misc). I will next custom tags and custom images. Added max/min extra temp for WDL. More work done on the detailed noaa reports (in vers 10.30j), delete the climatedata.htm file in your web files folder. Windchill now only works below 10oC Added chilling hours to view, av/extreme, av. over time span. Some other small bug fixes and improvements. Yesterday.wmv (all day movie web cam) works now ok. Added ability use a 1 wire snow detector (based on the leaf wetness or soil moisture 1 wire chip) ( a work in progress)
7th Nov 10.30h Ftp to other ftp servers in the customise internet and file creation now works OK , as does setting to use different remote directories for each file (for the normal ftp server setup).
Now works ok with a rainwise station with solar and UV added.
Max gust last hour is now a rolling last hour number. Now works correctly with rainfall with a Vaisala MAWS station.
3rd Nov 10.30f Davis VP weather link .wlk data import now works OK for the current month (bug fix where the logfile was wiped when it was finished importing (only with the current month). Update to the detailed noaa reports to show metric units for number of days... Now you can set to have files upload to different FTP servers in the customise internet and file creation setup (been a long time coming ). Tick to enable that, and set to 0 for the ftp server to use if not needed for that file
1st Nov 10.30d Separate zip back up now working OK. 10 minute average speed option now OK for average speed pointer on weather dials.
31 Oct 10.30b full install, zip data backup routine now a separate program , will be much better, and will stop a memory leak occuring with that.
Fixes the alltimerecords.gif not updating (just the year stamped file was being updated)
28th Oct 10.30 Wunderground working again after i had a space in the version number.Gust speed froom a metar for station data for stationless now works. Year to date detailed noaa report works better, still more work to do there yet.Back button on the main screen graphs works again .
27th Oct 10.29z zip, graph temperature range now works as it should do (i.e that its a range from low to high (i was before converting to oF (note, check you may have to increase the range value, if you have set to use that feature)
26th oct 10.29y L crosse 3600 old data from extraction problem fixed (on the 2nd time its restarted), also you can set a barometer offset for the extracted data (and for the 2300 too). Added a new detailed NOAA report..see on the far right hand side of the view, averages/extreme :)
25th Oct 10.29x Split out the custom tags routines more and improved them, which has fixed some recent stability/cpu use problems
24th oct 10.29v Now you can set for files to go to different directories , in the customise internet and file creation setup. Now OK for use with a 3600 station and heavy weather data file.
20th Oct 10.29t Now has smooth averaging for temp/hum in the year to date graph under view,graph history (much better).
Rain data from 2310/3600 data import now uses the correct data position.Added support for the Inspeed Vortex anenometer Which you can use with any weather station)
19th oct 10.29r more fixes and improvements for the data extraction at start up for a 2300/3600 station (i.e barometer and rain now work OK). Rain icon should now show at time from a metar if the metar also reports overcast. New method for determing rain icon (stopped raining/recent rain/ etc). Rain wise data extraction should be OK for longer than 1 minute data record now too. Some improvements to the davis .wlk data import (i.e checks to not over lap months at the end). Daily hi/lo window can now be hidden in system tray as an icon there..You can now set the names for the condition colour and 3 more thresholds added, and you can set the colours too for each threshold.
19th Oct 10.29p Should be better for non 1 minute data logging interval for data extraction at start up,and the warmest/coldest day/night should now update during the data extraction at start up routine. Also now checks the 3600 gust so its not lower than the speed, when using the 3600 with heavy weather option. New movie maker version (with the full install) that checks the time/date stamp on the web cam image file, so that yesterday's pictures are not used.
18th Oct, 10.29n, new revision: new fire weather index graping (will graph all the values (not, not retrospective))
16th Oct 10.29n Should be much better for reading in the 2300/3600 data extracted at start up now.
Some more custom tags added. Wedall uploads OK now. Now you can set the times to create and upload all the wxlocal.html files in the cutomise internet and file creation setup.
14th oct 10.29k La Crosse 2300/3600 data extraction works much better now. Also option to not send weather report to your email now works OK too. Moviewmaker.exe new version (to fix bug with lastday being created when last hour was being created)
12 th Oct 10.29i Fix for a problem with on the minute routine in 10.29f . New full 24 hour graph data for latest version of WDL . Fixes for spanish langauge. Full install 10.29i has a new moviemaker.exe program that runs the wme batch files and uploads the files when that has finished. Wedaal weather map support added.
9th Oct 10.29f All day video movie creation now handled by a separate program, called , moviemaker.exe Some more Italian added to dfault web table
7th Oct 10.29e zip should be OK now for the la crosse 3600 data extraction at start up of missed data (now waits for longer for the histlog3600 to finish), but also added a force button to the data logger setup if it tried to early
7th Oct 10.29d Fix for new ftp metar download option for having metar appear on your web page as text.
Nexstorm.txt now has 200 count information stored (2x what it had before). Not that your data restart/resets (one time only) with this change
6th Oct 10.29c Added right mouse click to icon in system try to show/hide main screen. Fixed bug with setting for faxing weather reports. Increased array size for data from a la crossed 3600 data history at start up 10.29c full install now has the clientrawrealtimeftp2.exe renamed as realtimeftp2.exe , so that wd can now know its already running and not start it again
5th Oct 10.29b Added option to use FTP download for metars (means you get more up to date metars now).Added ability to send fax weather reports now (you need Symantecs WinFax Pro).
4th Oct 10.29a zip Fetch3600 windspeed now assumed to be knots and not m/s (for use with la crosse 3600 station)
New custom tags: weekly averages and hi/lo for last week added
3rd Oct 10.29 Added option to plot 10 minute average direction to the graph setup - use this insterad of plotting direction as dots?.Fixed bug with %dailyhitemp12% custom tags. Added ability for a la crosse 2310 or 3600 to work with a 1 wire windspeed sensor (to give every 2 seconds windspeed updates). Added new load ligntning log (for month to date or other monhts).Fixed bug with setting the rain totals in the last 7 days, in the rain detail. Fixed problem with clientrawextra upload with the clientrawrealtimeftp.exe. Added option to plot lightning counts on temp/hum graph. Also should be better for sheduling of agenda items to do.
17th Sep 30 day data for WDL OK now. Instromet sunshine now works OK !
15th Sep 10.28y Improved the clientrawdaily.txt problem. Instromet sunshine hours should now be OK. Added a HTTP server to the web cam capture, so you can then URL link direct to the webcam image on your PC for near live image updates.Clientrawrealtimeftp2.exe buyg fix for clientrawextra.txt uploads. Labjack AO switch should now work.La crosse 3600 direct support without need for heavy weather improved. la crosse 2310 data extraction improved (no need to run heavy weather to get missed data)
11 sep 10.28t Fixed a bug with the saving on th ehtml file after converting the tags in the new html editor.
Added ability to set the speed of the animation in the view, downloaded images (for selected animated sequence)
10th Sep 10.28s New data fo clientrawdaily for WDL next version (last 31 days wind direction, and last 12 months rain totals)
8th Sep 10.28r Added ability to set a smalle size for the auto scale graphs on the web , via the customise the auto scale graphs (% size setting). Wunderground almanac fixed after they changd things again. %rawdataheader% custom tag fixed
You can now use WD with a La Crosse 3600 without Heavy Weather (com port 1 is default), using the separate fetch3600.exe progam by Sandere.
7th Sep 10.28q Added WYSIWUG HTML web page creater (see under control panel) :)
2nd sep 10.28p Fixed bug with noaa forecast file on web page, relating to location of the FTP download (setup #2 was the one which set it). Added ability to set the colour of the text on the sun moon images rise/set image. Control panel now accessed from menu directly
1st Sep 10.28o CRC error check now in use for Capricorn stations.
30th Aug 10.28o Fix for when you use the log file correction, and you correct the daily rain total for the day, and then click on , use the corrected amount (bug was that your log file was deleted!). Also now creates a backup log file when you go the log file viewer/correct data setup screen.
30th Aug 10.28n Fx for Awekes (there was not barometer).Apparent temperature added to clientraw data for WDL (use the latest zip version)
27th Aug 10.28L. Added direct support for the Awekas project. Noaa 5 day forecast should auto update OK now. Video files creation (.wmv files) is OK now (asa the FTP of the files is now properly delayed). You can now change the colour of the ligthning plot on the wind direction graph. Improvement for windspeed handling from the Davis VP download.
24th august 10.28i Davis wlimnk piggy back improved more (rain and wind direction work correct now, and wd will catch up on missed data too). Lightning counts on client version work OK now.Wunder ground almanac works again now after
wunderground made some changes (for the city selection list). Fix for rain showers icon from metar (re fixed after lost code problem).
18th August 10.28c zip: New feature: animatedcustom screen image (tick to select the custom screen to include, via the slide setup, under the view panel, and then tick to produce the animatedcustom.gif, and then select
to update/upload every 10 minutes or every hour
17th August 10.28b With the full install, you can now set up to create a movie of downloaded HTTP images (i.e sat pictures or rain radar images) . See at the bottom of the view, downloaded images setup. YOu can
also set to have a wmv movie file automaticly created and uploaded to. Also added values limits tot he barometer/rainfall/offsets screen, to be able to limit values, for when if a sensor looses its reading .
12th August 10.27z WMII data extraction improved more (to avoid 0oC problem). Piggy back on Wlink 5.4+ improved. Auto zip backup upload should be fixed now, and other fixes for the FTP upload (for the 5day forecast file and the all day moview .wmv files too).
Plotting of lightning counts on main screen will now plot nexstorm count. Also reset of lithing counts since midnight or midday should be Ok now too.
11th August 10.27w Should be OK again after I lost some of code when I ran out of space on the HD. Added option to plot the lightning strikes on the main screen graphs (on the wind directin graph). Added optin to not show any borders around web images (in the web files/web page setup)
Davis WMII data extraction improved. Some other fixes and improvements , and option to not upload the wmv all day video files added too.
5th Aug 10.27n Now added ability to piggy back with weather link (v5.6) binary data files (i.e .wlk files), see under stationless mode. Also you can now import those files into WD, to convert past weather link data (under action, import logfiles,davis import)
3rd aug 10.27m Rain days should be better, and rain detail now lists the order of the last 7 days better. New ftp programs versions (makes copy of the files, even now for the clientrawrealtimeftp program) so as to avoid any clashes with them being created (download the full install to get those). Also changed WD's main 1 second timer which should help with any crashes.
Also you can now easily view the all day video files, and alo the .wmv is created closer to sunset now, and there is an option to create a date stamped .wmv file too
29th JUly 10.27k Fixes the memory leak I have been chasing since 10.27n!
28th July 10.2kj Now can automaticly create .wmv (compressed) all day and last hour movie files and upload them to yoru web site. See in the all day video, in the direct web cam
capture setup (you need to have every minute file creation working). New ftpupd.exe version, now the temp files are deleted after being uploaded
25th July 10.27i The FTP program now makes a copy of the file to upload (add temp on the end), to avoid conflict (no more "cant create errors in WD's program error log).
YOu can now change the colour/fonts, etc in the rain detail. Added yesterday rain to the clientrawextra.txt, and WD version too. Added option to misc/extra to now update the main screen graph and or the real time graphs (see the very bottom of that setup screen)
24th July 10.27h Now 10meg less memory use (by not compressing the .exe file), and memory leak that developed after 10.26m should also be better too. This is good news by the looks. Also the increasing handles use
with the nexstorm integration has also been fixed. Also have now added optin to create web cam movie every hour now.
17th July 10.27d New icons for the clientrawrealtimeftp and ftpupd programs (thanks chow) (with the full install).Bug fix for barometer with a 2310 introduced in a few versions back.
A few other bug fixes and improvements.New linux version out too, with the power and customisation of the windows version graphing routine.
7th July 10.27 A memory leak with the use of custom screens fixed (after adding code for the transparent gifs in 10.26m that happened).
5th July 10.26x Bug with ET value stored for the solar graphs fixed.Sun hours for Instromet station now much better. Now added to use history.dat for , for the 2310 type station for data extraction.
2nd July 10.26v The speech file uploaded is now called talkingnew.wav instead of talkingnew2.wav (and this works now), e.g http://www.weather-display.com/windy/gb/talkingnew.wav
The new dailylogout.htm file is now fixed for days less than 10 . Fixes for THSW on the all time records, etc.
29th June 10.26t Rain records ok for the Instromet station. THSW all time records and daily records added, and addded ability to set them too
23rd June 10.26m Added option to have transparent gifs: summaryimage/metar.gif/trends.gif (see the summary image and icon setup), weather dials image (see the webfiles/web page setup), individual dial images (see the custom web page, in the webfiles/web page setup).
Also added ability to import a VWS csv data file (month at a time)
22nd June 10.26i Fixes problems with readings from the 1 wire solar sensor (and that routine works faster now too).
21st June 10.26h Fixed where the windspeed was not being used with the THSW. Finally fixed the daily reports not been correct for ws2010/ws2000/ws2500/3600 and some other station types too. Added option to plot thick line for 10 minute windspeed.
Added option to show humidex instead of heat index on the left hand main screen data.
19th June 10.26e The left and right arrow scroll arrows on the main screen graph now do not produce an error (invalid floating point under view, program error log).
Added all time records for THSW. Fixed ET val;ue on the solar graph. Fixed THSE under Davis VP extra sensor info. Fixed the max temp/gust/last hur colour/font setting. Fixed an issue with rain dasy on the rain detail. Fixed the updating of the maximum average speed.
Fixed extra a.m. or p.m. on the web table.
17th June 10.26 Changed the xml warning to hopefully stop the out of resources error with the richedit. Added ability to set to use a metar in the wunderground averages/extreme. Fixed some bugs with the THSW being shown under the dew point (see in the misc setup)
, and added some more custom tags for the THSW. Fixed a few things introduced in 10.25z.Added last minute/5/30 and 60 lightning strikes infor for nexstorm users to the lightning page in WD.Added new 24 hour graph, 24 hours ago (right mouse click on the main graph to see that).
The FTP program now reports the current upload speed , kb/sec, too, and the bytes uploaded now work correctly (in the FTP log in WD).
15th June 10.25u Fixed a bug with the Wunderground almanac for cities with name that is 5 letter long. Fixed wind direction for max gust/last hour and max average on the main screen. Fixed Bold Italic font not being remembered.
13th June 10.25p Added some custom tags to use , instead of . for decimal place. Fixed some custom tag bugs.Texas instruments rain should work now too.
Added upload speed to the ftp program too.
8th June 10.25o Davis THSW temperature index now working OK , you can set to plot that instead of windchill, see in the solar setup
6th June 10.25k Fix for introduced problem with all time records date/times, after I changed/split some areas of code.
Note that it has some to be that AVG vers 7 auto file scan can crash WD . Heavy weather 3600, gust data should be better now in WD. Other fixes since some code rearagning (which should improve things overall ) since version 10.25
Added option to plot 10 minute average windspeed in the graph setup (its a good result :) ) . Also fixes introduced bug with day/night too.
26th May 10.25a Fixes GDD in the averages/extreme reports.Code split up for data from the com port (hopefully I have not left anything behind). Added ability to have a Noaa warning email sent
22nd May 10.24v Fixes a bug with the rain from the Davis VP data logger extraction.
22nd May 10.24u Fixes introduced problem for WMR918/68 stations. Added ability to set baro max/min range on graph setup.Added UV offset (now works OK, its a % offset).Fixed more sensors on the extra sensor graph.
Also fixes selected file to upload in the web cam upload setup (where the path of the file was also part of the remote file name)
15th may 10.24j Added sunburn time (if you have a davis VP UV sensor). This initialy caused an error, but fixed that. Added ability to have a client version get lightning counts (not that that setting in the client/server setup got ticked on when it was not supposed to be in 1 version, check that).
Added option to use just 1 weather warning .wav file. Email to each email now works correctly too :) .Option added to have warning emails for lightning counts from the nexstrom counts.Added option to have a daily date stamped all day moive of he web cam images created automaticly in the web cam capture setup .
Fixed some erros that have shown up with the debug verison, like access errors from custom tags (when the custom web page is very big),
so this is a good version to upgrade to
13th May 10.24f New dew point routine used, now WD runs faster, especialy noticable on slower PC's :)
11th May 10.24c Fox for distance in nexstorm data for WDL. Daily direct web cam capture resetting option now (now off by default).Texas instruments indoor temp as soil temp option now (off by default). Setting the data interval on the Davis WMII now works.
9th May 10.24 Fix for introduced bug with the ws2010/2500 type stations, where the log file 52005lgsun.txt was getting too large. Delete that file and run this version (the bug would cause with the daily (i.e at midngith) averages/extreme update
7th May 2005 10.23y The ET scale on the solar/uv graph scale is OK now for when inches is set. Nexstorm integration data reports bugs fixed.
5th May 2005 10.23u Fixes access error when 3 or more metars in use and image being produced from them, error introduced in 10.23q . No more vertical lines left on the graphs on the main screen after moving the mouse :)
3rd may 10.23s Fixes a bug with the temperature from the metar for stationless. Range limit for nexstorum data should work now. Nexstorm lightning log strike count should work now too. Option to keep selcted icon in input daily weather added.
3rd May 10.23r Fixed the sunshine hours log not being saved for the ws2500 type station daily. Added ability to set the max/min outdoor temp scale in the graph setup. Adjusted the graphs , the temp/hum graph is now taller, the windspeed graph is now shorter
29th April 10.23q Fix for http download setup #1 (and added every minute (good for internet web cams). Added support for the instromet station.Added option to select which remote dir for wap upload.Rain last hour on metar image will now reset. Fixed issue with 2310 station start up if wireless option in use.some web cam issues, like animatedweb cam, web cam image option on main screen not showing in some setup combos. Fixed current conditions text in input daily weather not showing below main screen icon too.A few other fixes found over the last month while visiting wD users in the UK/Germany too.
28th March 10.23p Much better for the Davis WMII data extraction
27th March 10.23o Fix for occasional VP data extraction miss fire (would happen when the minute to extract the data from was the same as the current minute). Some more lightning count tags added. Also the date format fixed on main screen, daily hi.lo and sunmoonimages (k.e for d/m/y or m/d/y option)
21st March 10.23L Fix for NOaa warning when its a short term forecast. A few more lightning custom tags.
16th March 10.23j Full instal (with new ftpupd.exe version), fixes the mesomap 2 and 3 for wunderground data
15th March 10.23h You can now set the jpg quality of the file saved in the direct web cam capture...this reduces the file size considerably, if set to say 90%, but quality is not affect much.Mesomap background image offcenter fixed.A few more custom tags added, as per the WD forum.
9th March 10.23d Standardisation more of custom tags for units added. New custom tags (history tags ) added. Working on ability to get data from findu.com (peet bros protocol).You can now change the humidity colour on the extra senors page. CSV log file for ws2010/ws2500 should be OK now. Still working on skyviewdata logger, made more progress (saving of station settings and delete data now works OK). I have here a Davis WMII now, so I will soon work on the data extraction needed fixes with that.You can now set the font of the metar conditions on the summary image, and the full metar sky conditons now shows on the summary image. Some more fixes for the snow icon from the metar. Noaa warning now fixed for the event tag.Frame rate for web cam now saved OK.Other smaller bug fixes and improvements. (still to add better control /setting of windspeed ranges on the graphs). Also fixes bug with using barometer from metar
3rd March 10.23b Fixes for custom tags for hdd/cdd and days <0 etc, and added yesterday snow custom tag
1st March 10.23 End of month reports should be good now.
26th Feb 10.22y Fixes problem with 3600 history file data read in at start up if the history file was large.Added more 1 wire leaf wetness thresholds.Work progressing well on 1 wire 12 volt switch (so that you can turn off and on appliances,heaters/air conditioners, etc)
25th Feb 10.22x New wind direction arrow and pointer in mesomap. Fixes daily noaa reports not uploading.Fixes bug with seting gif filename in the direct web cam capture.
22nd Feb 19.22s Fixes the max/min pointers on the baro dials.Noaa and av/ext reports to printer/email fixed (But I still need to check Februrary will be handled properly).
19th Feb 10.22r Data extraction from missed data from a Capricorn 2000 station now works (set that in the data logger setup). Better web cam setup screen. 5 day forecast image a bot narrower.A few other bug fixes and improvements and requests added.
14th Feb 10.22q Fix for Rainwise after data extraction at start up (live data then not being used). Web cam images from during the day jpeg option should work ok now.
13th Feb 10.22o Exit error fixed (note, use exit, save and exit for the fix :) (I was not disconnecting the comport...thanks to Wayne at Rainwise for that revelation! )
12th Feb 10.22n A few more (last now) fixes/changes in the direct web cam setup file save settings.More customisation of individual dial images added (colour, etc), and the dial images on the custom screen.File save for 2nd direct web cam capture now works. More minor mesomap fixes (mouse pop witwh the mesomap hot), and added a fine tune image size adjst for the mesomaphot.htm , to the 'position mesomap stations' setup.Started work on option to have 10 minute average windspeed. Rain rate for WDL improved (will zero correctly now).
9th Feb 10.22i New direct web cam capture file save settings...please check the file names for gif and jpg are correct. Added 2nd direct web cam capture (still to add file save ability).Fixed having 2 animated downloaded images (i.e the animatedhttp.gif and animatedhttp2.gif now work correctly). Added ability to get data, as stationless/ client setup, from a APRS/Findu.com station (great for remote access using a TNC )
6th FEb 10.22f Fix for mesomap #1. New in custom screen: disable scroll bars, and manualy set width/height of screen. New all day (or set start/end hours) video creation (mpeg file), where you can pause. rewind/stop/forward /slide to position with built in player (see in the web cam capture screen).New for trends: max/min temp this day last year (if you have that data in WD). Sunrise/set icon fix if not as separate icon in summary. Fog icon station override fix. Animated fog icon now just static image...was causing problems (crashes). Fixes for xml warning. Yesterdays snow added. Some new custom tags added. A few other bug fixes and improvements as per the WD (weather-watch) forum.
26th Jan 10.21x Fixes WD's calculated ET (evapotranspiration) :) (bug was introduced after 10.18)
24th Jan 10.21v Fixes crashes with the use of the Noaa warning, and its faster now too.
22nd Jan 10.21t Fixes below zero F for the Texas weather station.Some new custom tags including a noaawarning tag.Mesomaphot fix for when more than 1 mesomap in use
19th Jan 10.21n Now works correctly for the WS2310 type station over 50 knots (25.5m/s) or 57mph (thanks to Kenneth Lavrsen)
17th Jam 10.21k Hotlink mouse over for the mesomap now (as mesomaphot.htm). Also fixes some more issues with the mesomaps.
17th Jan 10.21i Mouse over on the mesomap graphs now show the acutal data at that mouse position...:)
16th Jan 10.21h (full version). Fixes a small memory leak with the daily av/ext uploads. Also fixes the double letters in the noaa report. Ticks for which custom screens items are set visible now shows in the custom screen.A few other bug fixes reported on the WD forum.
7th Jan 10.21f Bug with setting gif file location for direct web cam fixed (note, you need to also set the jg file name too). Alos, now WD save data for the wddatabase.exe program from missed data now from the datalogger (download a new wddatabase.exe from http://www.weather-display.com/downloadfiles/wddatabase.zip)
6th Jan 10.21d Fixes conflicts between custom screens, and dials on the custom screens. Should be good now!
4th Jan 2005 10.21a 2nd mesomap now OK again, and 3rd mesomap should be OK now too. A fix bugs with the custom screens fixed too (displaying the wind dials, etc). French Davis VP forecast now added.
3rd jan 2005 10.20y Added all time records for dew point and humidity and solar and UV. Also fixed a problem under view/averages extreme for viewing past months data for solar and ET values
1st jan 2005 10.20x Fixes a end of year problem (and possible crash) if daily average/extreme and noaa reports enabled (and the new end of year av/ext report too).
31st Dec 10.20v With Ftpupd.exe 7.50, the data extracted from a data logger (e.g from a Davis VP), now updates wunderground with that missed data, and also updates the mysql database with the missed data as well. Will work on getting the wd.mdb database to update with the missed data as well.Bug with temperature and windspeed dials not udating on the custom screens fixed.
29th Dec 10.20t Fixes for the mesomap ,and added 3rd mesomap setup (you need to use the latest ftpupd.exe that is inluded in the main download). Custom web page setup moved to the webpage/webfiles/realtime ftp setup.
28th Dec 10.20r Should be a fix for the problem with the real time graphs resetting once they reach the max number of records (default is 5000), which was causing an expection error and then the program to crash. Also increased the Davis VP rain threshold.
22nd Dec 10.20q Fix for mesomap where windchill was being used for Metar data.Improvements to the custom screens (and now a slide show option even), and all 10 custom screens can now be uploaded to your web site. Improvements for the new noaa warning and warning scroller on your web site.
17th Dec 10.20n Fixes WD not closing properly when you exit.Noaa warning new state selection now works OK.
17th Dec 10.20n Noaa warning auto download you can now select the state zone. Added screen transparency (works with the windows 2000 only). Fixed edge problem on the individual wind direction dial image. Improved/fixed the setting the web page background colour in the web files setup. Working on adding GDD warning (nearly finished). Floating window now disappears when the mouse moves past it.
16th Dec 10.20m Added solar and UV warning email. Added NOAA warning download of elected state (and this can then be added to your web site as a scrolling text). Other improvements and bug fixes too.weather warning voice now works beter.
11th Dec 10.20i IMprovements with the new web cam capture. Fix for clientraw.txt (and for snow amount too). Support for the WS3600 via the Heavy Weather history.dat file
5th Dec 10.20 Hopefully fixes crash with the ws2010/ws2500 tyoe stations. New web cam capture in use, lots of new goodies, including live network steaming.. the stationless type in the weather station type setup (which has been "improved")).
19th Nov 10.19s (updated). Using the clientraw.txt from another location (i.e client setup), the data now updates every second instead of every minute, like it used to. New: cloud height graphic on the weather dials (turn it off in the units setup), and a cloudheight.gif is created/uploaded with the weather dials upload. New average wind direction custom tags added (10/15/30/60/120 minutes averages). New weather station type setup menu: now in tabs fro each weather station type.
Fixed freezing line on the graph
16th Nov 10.19r Added option to store indoor temp/hum for longer than 72 hours on the extra sensor graph history (see in the graph setup). New: added option to have the downloaded noaa forecast 5 day image, the 1st day forecast can now be set as the "VP forecast". Improved the 5 day forecast (overlappping days fixed). Suppport now for 1 wire leaf wetness and soil moisture
15th Nov 10.19q Added new icons to input weather (light rain, stopped raining, and windy rain), so you can set your own icons for them. I also fixed where your own icons were not been used too.Fixes , List index our of range errror, for if you have WD set as a server use (no ftp)
12th Nov 10.19o CRC error check now works for the w2010-13 data logger and ws2500 type weather stations (i.e al Lacrosse stations (except ws23xx type stations (does not apply). This should prevent any data spikes.I recommend all users upgrade to this version, of that weather station type.
11th 10.19n (New version ready soon), a fix for the aprs server rotation with ftpupd.exe 7.45. Also, WDL 3.02 released with lightning support
10th Nov 10.19L Fix fo sun set/rise icons.Nearly have the ws2310 data extraction working correct (and then I will work on the ws2010)
5th Nov 10.19a Fix for some custom tag issues. Fix for real time graph barometer range, and other ranges, at program start up.Fix for a few end of the month problems (links on the averages/extreme page)
1st Nov 10.18x Fix for %maxavgdirectionletter%. Fix for if use dallas 1 wire as well (wd was running into problems).Fix for temperature line on the real time graph history (under view, graph history).Fix for daily.csv file for use with image salsa. windspeed last 30 days needed for 3.01 of WDL OK now.Everything else looking peachy hopefully.Direct web cam capture sets up correct after a pc reboot now (if you have ticked to reset at start up), and the reset daily should work to for the web cam capture
27th Oct 10.18t Fixes custom tags problem (which cam about after too many tags in the program (I had to split the routine in half!)
26th October 10.18o Fixes for the Davis VP data extraction (midnight reset and solar on solar real time graph)
26th October 10.18n More metar tags added. Fix for the icon being set from the metar conditions even if that was not ticked,in the summary image and icon setup.Some other tag fixes, including %daysTmax<0C% , etc. Custom wap station name tag added %wapstationname% Different language options added for the Davis VP ticker (see in the summary image and icon setup)
22nd Octover 10.18j Fixes gltich Introduced with the davis VP data extraction (where it stops at 100%).Mb of ftp use now under view, ftp log.New images for FWI pointer (thanks Gary!)
21st October 10.18h Fix for windchiil plot (and option now to plot heat index added). Fix for Environdata station crashing, and Cmabell scientific (would happen becuase the data quality light was not flashing). Fix for limit nexstorm distance. Fix for last 30 day hi/lo data for WDL. Added ability for Environ data station to get data via internet (TCP connection). Fix for MySQL settings not saving. Working on Mesomaplive.
19th October 10.18f Fix for Nexstorm integration (CPU use was running away).Other minor
| 
